Jump to content
SAU Community

Recommended Posts

Hay guys i have been talking to afew poeple =) about cars more towards imports.

afew guys i was talking to say that you can bend the chassis just by hitting a gutter etc. =)

and they were saying that when u buy a car from japan even if they say it hasnt had any accidents there no way of the inspectors or whoever is there to tell if its been cut and shut chassis damage etc =)

now i wanted to ask you guys how bad is this stuff.

if your chassis has been damaged. not talking about hitting a poll or whatever if its in an accident etc

if they were to straghten it back up will your car be the same?

handle to same drive the same etc =)

tell me your thoughts hehe

Link to comment
https://www.sau.com.au/forums/topic/6901-chassis-damage/
Share on other sites

if u get a wheel alignment done front and back before you buy the car they can tell there and then if the car is bent!

this is what i was told anyways....and ours checked out alright

:(

btw...you dont want a car with a bent chassis, it will handle like shit and when you brake, the car will pull to one side....you can also tell if the car turns better in one direction than another.

also...check the subframes which hold the suspension, this can also cause the problems listed above...

hope this helps in some way

Link to comment
https://www.sau.com.au/forums/topic/6901-chassis-damage/#findComment-102100
Share on other sites

Or just buy your skyline from a reputable importer not a dogy backyard guy.

The auctions in japan use xray analysis on the chassis which indicates when a car has been repaired. The results are evident in the auction grade of the car in question

Link to comment
https://www.sau.com.au/forums/topic/6901-chassis-damage/#findComment-102272
Share on other sites

I found a little while ago that one of the chassis (?) rails was a bit crushed and one of my sills has a dent in it, I think this may have happened a one of the services I've had....

The car still drives good and nothing was mentioned when I upgraded the shocks and wheel alignments have been done with no problems. I think someone would have said it needed fixing if it was a problem..

Don't know if this is the sort of info you were after??

Link to comment
https://www.sau.com.au/forums/topic/6901-chassis-damage/#findComment-102320
Share on other sites

Originally posted by hippy

boosted?? so i think i might have that problem ... what can i do to rectify it?? that is the problem with the shitty handling and steering problem as well as the car pulling to one side when braking.

My 180sx had wheel adjustment problems. I couldnt get the camber on the left straight at all. Finally a friend discovered the car had a bent chassis and they never straighten it up properly.

I took it to a friend who fixed it beautifully.

Bent chassis arent that bad. Anything these days is fixable. Its up to you if you are the worrying type. Better off as Nick says going to a reputable importer. But if you dont mind things like that then it isnt that bad.

Needless to say but the 180sx was perfect after that.

Link to comment
https://www.sau.com.au/forums/topic/6901-chassis-damage/#findComment-102509
Share on other sites

Originally posted by hippy

so how do i go about fixing it?? who can i get to do it for me and what does this kind of work involve?? cause i 've had an accident with the car already ... so that could of made it worse ...

A reputable smash repairer.

Trust me they know and can fix it, its their job.

All the best my friend

Minh

Link to comment
https://www.sau.com.au/forums/topic/6901-chassis-damage/#findComment-102540
Share on other sites

Guest LoudBlueBMW

If there is damage to the chassis and it is corrected properly then by all means it should steer, handle, etc as well as before, but keep in mind the properties of metal and how if you bend it one way then another it will weaken it somewhat. Correcting minor damage shouldn't really pose a problem, but if the car has had major accident repair, think about the next time the car cops a hit, will the driver be so lucky? That's why a lot of people that have accidents in cars and get them repaired will sell the cars afterwards.

Link to comment
https://www.sau.com.au/forums/topic/6901-chassis-damage/#findComment-103222
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
    • Also playing with fire if they start to flow more air down low than what the stock twins can. It's not even up top you need to worry, it can be at 3000rpm and part throttle and it's getting way more flow than it should.
    • Any G40/1000 or G40/1250 results out there?  
    • You still want a proper tune on the stock ECU though. Stock tune + stock ECU with GT-SS/-9s is probably playing with fire if you're running more than stock airflow/power.
×
×
  • Create New...