Jump to content
SAU Community

Recommended Posts

Hey guys got 3x17x10" wide rims for sale.

When i bought the car it only had 3 on so sorry bout that but.

10" wide are very expensive and hard to come by.

Perfect for drag or track racing etc. wouldnt be hard to find another if you wanted a set.

DSCF0029.JPG

17inchrims.JPG

DSCF0027.JPG

the current 2 rear 255's are down to the belts, and the front 235 has 75% tread left

$600 neg

They fit on my 300zx. R33 GTS-T rims fit my zed so i assume they will fit all skylines with the same pattern as R33gtst's..

pick up only.

0405400170 or e2ek1el21@hotmail for MSN or email.

Peace

Matt.

Link to comment
https://www.sau.com.au/forums/topic/69683-fs-17x10wide-mags/
Share on other sites

sorry dude i dont have a skyline, your welcome to come try them on for yourself.

Ask doughboy, he may be able to send pics for you

im QLD. gold coast

offset for 300zx is 114.3 and they fit sweet as front and back on the zed.

sorry dude i dont have a skyline, your welcome to come try them on for yourself.

Ask doughboy, he may be able to send pics for you

im QLD. gold coast

offset for 300zx is 114.3 and they fit sweet as front and back on the zed.

I think you mean PCD is 114.3

offsett is distance from the wheel hub to the centre of the rim sorta of a measure of how far the rims wll fit inside the guards

well dont think I can take up that offer anyway since Im in WA ahahha

give us a pm if you're willing to send maybe I'll consider it and a pic on the zed would also help since from memory I think Z32 and R33 GTS-t have very similar offsett on the rears. Just to see how it fits inside the guards

yea my bad, PCD 114.3

probably not going to be worth posting as wheels and tyres are heavy, 30kg in post will be killer! especially to WA

they sat in my gaurds a few cm's but my zeds lowered an inch which makes it worse.

ive had an offer of $350 but im really after $500 guys.

you wont get 10" rims this cheap anywhere. theres $150 worth of tyre on the front rim alone!

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...