Jump to content
SAU Community

Plex efforts

Hicks

By Hicks,
in Western Australia

 Share

Recommended Posts

Hicks Mentor

Hicks

Posted
Posted

Well tonight was pretty succesfull all round. Most of all macca.

I ran a 13.8, which I was very pleased about, Couldn't do it again though!!

Macca started with a 13.06, which we were all impressed with. But he had to show off and pull a 12.9 on his final atempt!!

Sean(or shan?) was pullin 13.1's to I think about 13.6's.

And adam was havin a bit of trouble with his car, 14.4 was his best I think.

Paul Didn't race cause his car is slow.

But all in all a pretty good night. (I'm F#ckin Happy!!)

Link to comment
https://www.sau.com.au/forums/topic/6982-plex-efforts/
Share on other sites
GTS-t VSPEC Grand Master

GTS-t VSPEC

Posted
Posted

We think Hicks actually picked up someone else's slip cause he only ran 14's when people were watching. :DThe only reason I didn't run was casue I had to lend my racing slicks to Macka, only reason he got the 12.9, other wise I'd have shown you what a 13 sec car looks like.

Well done Hicks.

See'ya:burnout:

Link to comment
https://www.sau.com.au/forums/topic/6982-plex-efforts/#findComment-103146
Share on other sites
Hicks Mentor

Hicks

Posted
  • Author
Posted
Originally posted by Strich9ine

Congrats to HICKS' 13.8 but I don't remember seein ya pull that time buddy!

not to worry, i'll vouch for you being car T20! - I saw it!

Trust me, I'm not sure what was different on that run but I did do it. You can see my car T20 on some of the pics.

ITS ME DAMMIT!!

Link to comment
https://www.sau.com.au/forums/topic/6982-plex-efforts/#findComment-103533
Share on other sites
osc@r Rising Star

osc@r

Posted
Posted

Well done Hicks.. not a bad effort at all.. gotta be pretty happy.

Adam.. you can try again when you get the car sorted out. If you don't burn it between now and then. Just have faith.

and Macka, bloody Macka.. just when I thought I had ya beat. Well done old boy, 12.98 is somethin to be proud of...especially seeing as you raced the whole night without blowin anything up.

Well I'm pretty stoked with my 13.10 ... the little Sr was screamin it's head off all the way down the quarter.

Time for some real mods.. please God, gimme 12's . :(

Link to comment
https://www.sau.com.au/forums/topic/6982-plex-efforts/#findComment-103615
Share on other sites
macka Veteran

macka

Posted
Posted

Hehe I think most of us were happy with the results,

On one run it was pretty funny Hicks took 2 car lengths on me at the start and then he looked at me as i flogged past him and I waved :D I think thats when u got u your 13.8 Hicks :(

I pulled my 12.98 Racing that Torana and he blew me a new hole but thats when i did my best too..

Oscar (Shannon) Did bloody good thats when i thought they were having Timeclock problems when he showed me his 13.2 first run!

KillerT Those tyres are top secret, They are worth a lot maybe we can do a deal haha.

Dont tell GTS-t VSPEC hey but ill give u a hint, It wasnt the tyres that did it :(

Link to comment
https://www.sau.com.au/forums/topic/6982-plex-efforts/#findComment-103723
Share on other sites
GTS-t VSPEC Grand Master

GTS-t VSPEC

Posted
Posted

Macka,

What do you mean it wasn't the tyres!??? It must be that large snail that crawled into your engine bay. Shit, just imagine the time you could have got on some decent tyres, probably would have fried your clutch though if you got more traction.

See'ya:burnout:

Link to comment
https://www.sau.com.au/forums/topic/6982-plex-efforts/#findComment-103726
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • dbm7
      R34 Skyline climate control unit transistor

      By dbm7 · Posted

      Need to see other side of PCB in that area...ie; I don't see any thru-hole mounting, just soldered vias (smd zeners in SOT23 have 3 legs but only 2 are used, as reflected by PCB tracks)
    • GTSBoy
      Another "where do these lines and plugs go" RB25DET question

      By GTSBoy · Posted

      4 to 5 is fine. It will be slow, but that's better than blowing turbos. I don't have a PS pump idle up solenoid on my car, because... I think when we put the Neo in we retained my R32 lines. But.... From inspecton of the R34 vacuum hose diagram, you can see that the solenoid needs to be connected to the turbo inlet as source of clean air) and the plenum (as source of vacuum - which is the place for the air to flow to to cause the idle to increase). So 3 to 1 is VERY WRONG. 3 should go to either the turbo inlet, or the plenum. Follow the other hose from the PS solenoid and if it goes to the plenum, then your 3 goes to 2 2 would also serve as a bleed port for a boost solenoid.
    • GTSBoy
      R34 GTR Seats / No longer reclining

      By GTSBoy · Posted

      Pull them out and pull more apart. You can't do shit with them still bolted to the floor of the car.
    • GTSBoy
      R34 Skyline climate control unit transistor

      By GTSBoy · Posted

      Yes it is. ZD1 is on the other side of the board. Where ZD1 is marked is clearly opposite a 2 pin device. Our 3 pin device here is not a ZD.
    • QB6SAGR
      Tein Circuit Master- rebuild worth it?

      By QB6SAGR · Posted

      Alright, a little update on this... I called Fulcrum, who used to be the distributor in Australia. No Bueno, they don't service them anymore.  Called shock works, who don't service them but offered to dyno the shocks for performance, and suggested DNA in Sydney might service them.  Called DNA, who also do not service them and basically said they try to steer customers away from tein for this exact reason these days- there is just no support for them anymore apparently.  Both SW and DNA said they are a not necessarily a bad product, but they just don't service the brand or know anyone who does service the brand anymore.  So... I could keep calling around but at this point I think I'll probably just spring for the shockworks product, unless anyone here knows anything.  Cheers 🍻 
×
×
  • Create New...