Jump to content
SAU Community

Weird Noise on idle...family of crickets living under hood?

boost4130

By boost4130,
in General Maintenance

 Share

Recommended Posts

boost4130 Contributor

boost4130

Posted
Posted

Hi all,

I have an annoying problem with my S1 R33 (RB25DET).

On idle i get this weird sound that comes and goes. It is a kind of faint whistleing noise kind of like a loose belt noise but it aint loose belts. The best way i can describe it is it sounds like garden crickets LOL. It is louder when the hood is closed.

Anyway i noticed 2day when i push the clutch in it stops. So i think it is clutch/box related.

Just wondering if anyone has experienced this. Any help would be much appricited. Thanks

Dave

;)

britto Apprentice

britto

Posted
Posted
Hi all,

I have an annoying problem with my S1 R33 (RB25DET).

On idle i get this weird sound that comes and goes. It is a kind of faint whistleing noise kind of like a loose belt noise but it aint loose belts. The best way i can describe it is it sounds like garden crickets LOL. It is louder when the hood is closed.

Anyway i noticed 2day when i push the clutch in it stops. So i think it is clutch/box related.

Just wondering if anyone has experienced this. Any help would be much appricited. Thanks

Dave

:P

Hey dave, yeah i have the same noise problem, exactly as you said. people say its a bearing thats failed. the guys at mercury motosport said if its not affecting the cars performance than you should be fine. also its more worthwhile, if you do decide to get it fixed to do it when ur say replacing a clutch/gearbox etc.

boost4130 Contributor

boost4130

Posted
  • Author
Posted
Hey dave, yeah i have the same noise problem, exactly as you said. people say its a bearing thats failed. the guys at mercury motosport said if its not affecting the cars performance than you should be fine. also its more worthwhile, if you do decide to get it fixed to do it when ur say replacing a clutch/gearbox etc.

Thanks for the advice 180_mph and britto! Much appreciated. :)

My skyline had a heavy duty clutch installed b4 i bought it and the gearbox is in good condition (despite some gear changes lately have been a little notchy which i think is related to my problem). Having said that i dont think i will be dismanteling my clutch/box set up any time soon so i think i'll get it fixed as the noise is pretty annoying. Any idea as to how much this will cost me? probably lots :) I had a look at a thread on it, i dont think its really the kind of thing i can do myself in the garage.

NZM.031 Grand Master

NZM.031

Posted
Posted

what it usually is, the fingers on the pressure plate bend and weaken after time and causes a misalignment on the friction plate, it makes them squeal like a belt, but stops when the clutch is put in, could also be a throwout bearing, but either way, the clutch needs checking and replacing

cheers

Linton

Zahos Mentor

Zahos

Posted
Posted

I had the same problem and it turned out to be the spigot bush (so i was told by the workshop that replaced my clutch)

It also has to do with the way the spigot bush is installed. I cant remeber exactly but something along the lines of pushing it in with oil pressure rather than greasing it up.

Anyhow, changed clutch (and thrust bearing + spigot bush) and problem solved.

boost4130 Contributor

boost4130

Posted
  • Author
Posted
I had the same problem and it turned out to be the spigot bush (so i was told by the workshop that replaced my clutch)

It also has to do with the way the spigot bush is installed. I cant remeber exactly but something along the lines of pushing it in with oil pressure rather than greasing it up.

Anyhow, changed clutch (and thrust bearing + spigot bush) and problem solved.

Thanks for the info Zahos, How much did all that cost u? just wanna get a rough idea of what im up 4. My clutch isn't slipping or anything...doesn't relly seem to be in too bad condition. I'd be surprised if it needed replacement but ill get it checked out anyway.

Zahos Mentor

Zahos

Posted
Posted
Thanks for the info Zahos, How much did all that cost u? just wanna get a rough idea of what im up 4. My clutch isn't slipping or anything...doesn't relly seem to be in too bad condition. I'd be surprised if it needed replacement but ill get it checked out anyway.

$800

See here: http://www.skylinesaustralia.com/forums/sh...ead.php?t=70335

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      PXL_20250828_063541093.TS.mp4
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • PranK
      R35 GT-R production ends after 18 years

      By PranK · Posted

    • SteveL
      Leak from Tokico BM50 Brake Master Cylinder

      By SteveL · Posted

      I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...