Jump to content
SAU Community

Recommended Posts

Has anyone done before/after dyno with this exhaust cam gear yet?

Is an aftermarket ECU 'required' for these or is it only an 'advantage' ?

I'm looking for little things to get me up over 210rwkw on the Std ECU/Turbo and this looks like the next step.

Whats the typical cost to have these installed + tuned at a dyno shop ?

Edit: I was also liking the rice factor of the HKS Purple+Blue :P

  • Replies 74
  • Created
  • Last Reply

Top Posters In This Topic

Hi Guys, I bought a set of Jun adjustable cam gears on the forum a few weeks ago. They appear to be standard Nissan GTR pulleys with the centre machined out and replaced with a steel adjuster. If they are standard Nissan teeth they will obviously last as long as they would unmodified, provided the centre line of the adjuster is lined up properly during the machining process. They have 5 adjuster bolts which should provide more than sufficient retention.

UniqueAutosports sell modified standard pulleys for $185 each for the standard weight and $195 for the lightweight ones. So, as long as they have the same accuracy of centring there should be no problems with theirs either.

If you are not looking for looks (the HKS ones do look trick) or extreme lightweight, these are viable options.

Hope that helps.

I wouldn't bother loosing the VVT until over 250rwKW, and use the cam gears in conjunction with better cams.

Steve, Thanks for the link, what would the postage be? I have worked it out before, and the group buy idea is better as only one postage cost is needed.

See'ya:burnout:

GTS-t VSPEC,

costs:

http://www.greenline.jp/info.php

says:

The following table indicates the shipping costs to Zone 2, which includes Australia, New Zealand, USA, Canada and any country in Europe. For other countries, please contact [email protected]

Base rate (up to 1 kg) ¥3990

For each 500g more than 1 kg ¥525

Works out at about $55AUD for the first kg (ouch), but $14.50 for every kg there after, which is a bit better.

when were you thinking of getting these? Soonish I hope. I'm after 1 (for now - maybe 2 later), and wouldn't mind jumping on the group buy bandwagon

Cheers

Steve

Steve,

Can you find out the weight of the cam gears, plus are there any additional taxes that need to be pay for goods coming into Australia?

I can buy them whenever, just trying to find somewhere which is cheaper than I can get them here.

See'ya:burnout:

Not too sure about taxes, have you had a chat to customs. From most of the feedback I have read, it seems that if it is under $1000AUD they dont seem to worry a heap - never know for sure though. I did get my turbo through, but the guy at the other end put it down as about $380AUD - they opened it for inspection, but didnt hit me any duty.

I will drop them a line, and ask about quantity for group discount and unit weight.

Steve

so on a car with a big turbo (like a HKS 3040) and the usual other mods like fuel pump, injectors, engine management (I have HKS FCONV, VPC and PFC-FCON), exhaust, intercooler. Would it be worth removing the VVT and getting a cam gear for both inlet and exhaust? It's an RB25DET, and what sort of cams should i go for? 256 Duration and 8.8mm lift? or bigger, to something like 264 duration and 9mm lift? What would the difference be between the two cams?

I'm liking the sound of the Toda gears myself! The top end power is pretty good so i'm more after some street usable mid-range at this stage. I've also read on the other CAM thread that you might be able to get the inlet cam slotted to allow adjustment and still keep the VVT.... is this true or not worth it?

Thanks

Andrew

GiJOR33,

With a setup like that, then yes I'd do both cam gears. Sounds like a similar setup to what I'm going for.

Cam's I'd go for the 264's, but the 256's are also very good.

Yes, it is possible to slot the existing gear, but the VVT doesn't have sufficient impact to make it worthwhile doing at big horsepower.

See'ya:burnout:

A guy at work machined out the centres of my steel gears and replaced them with adjustable alloy centres (which he made as well). They allow +/- 4 degrees adjustment and only cost me $17 for the materials and a slab for the labour.

Guys go to a machining company with a design and all your standard gears in bulk and it will cost you **** all to get them modify.

Why buy wanky brand name gear? It doesn't make your car go any faster and it costs a fortune.

Pawley, I think the UAS ones are made exactly the same way as Rowdyr32's are. That would mean they have like a $150 markup on them. Which I guess isn't over the top, but if you look around enough you can probably get it done cheaper (let's all ask Rowdyr32's mate if he wants to do some more for us ;))

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...