Jump to content
SAU Community

Recommended Posts

Just buy a proper dump pipe, get a split type if you really must, BATMBL has quite a few on offer here: http://www.skylinesaustralia.com/forums/sh...ead.php?t=15558

costwise i don't really want to spend another 200 bucks plus for an extra piece of metal when I can use the gas axe, welder and a bit of pipe for about 50 bucks.

also i reckon that if i plum it close to the cat (as far away from the turbo, this will give better turbo efficiency because there is less turbulence. Thats the idea of the screamer isn't it?

what you guys reckon?

Link to comment
https://www.sau.com.au/forums/topic/70955-screamer-pipes/#findComment-1308991
Share on other sites

The concept of screamer is when the wastegate dumps the excess exhaust gases to atmosphere. This is why it is called a screamer pipe.

It is recommended to plump back as far away from the turbo as possibble. This will reduce turbulence. For legal reasons this must be before the Cat converter.

Hope this helps

Link to comment
https://www.sau.com.au/forums/topic/70955-screamer-pipes/#findComment-1309013
Share on other sites

run the screamer pipe through a 2inch cat or something mountedunder the car.

this way the exhaust is let off through a cat (not illegal)

then go to your local exhaust shop (EPA approved or whatever) and get a db test done.

when they rev it to 4xxx RPM, the wastegate wont open, making it legal noise at the required RPM.

its only loud under full noise.

Think about it. :cheers:

Link to comment
https://www.sau.com.au/forums/topic/70955-screamer-pipes/#findComment-1309942
Share on other sites

run the screamer pipe through a 2inch cat or something mountedunder the car.

this way the exhaust is let off through a cat (not illegal)

then go to your local exhaust shop (EPA approved or whatever) and get a db test done.

when they rev it to 4xxx RPM, the wastegate wont open, making it legal noise at the required RPM.

its only loud under full noise.

Think about it. :P

Hey this is a clever idea :cheers:

I agree, this would work as you really only need a cat on the screamer pipe for legal reason's but mufflers and such are for noise reduction. The wastegate will not open at 4000rpm with no load so this will pass a db test.

You get the best of both world here, legal and a screameeeerrrr :wassup:

Link to comment
https://www.sau.com.au/forums/topic/70955-screamer-pipes/#findComment-1310191
Share on other sites

Hey this is a clever idea  :cheers:  

I agree, this would work as you really only need a cat on the screamer pipe for legal reason's but mufflers and such are for noise reduction. The wastegate will not open at 4000rpm with no load so this will pass a db test.

You get the best of both world here, legal and a screameeeerrrr  :wassup:

However, even though you pass the noise test you may not be legal still unless you adhere to the standards regarding how far back and where you are allowed to vent exhaust gases. In the ACT i am prett sure you are *only* allowed to vent exhaust gasses out behind the rear bumper and are not allowed to vent at an angle. Just something to think about.

Link to comment
https://www.sau.com.au/forums/topic/70955-screamer-pipes/#findComment-1310298
Share on other sites

Hey this is a clever idea  :cheers:  

I agree, this would work as you really only need a cat on the screamer pipe for legal reason's but mufflers and such are for noise reduction. The wastegate will not open at 4000rpm with no load so this will pass a db test.

You get the best of both world here, legal and a screameeeerrrr  :wassup:

not really, see thats extra piping, which in turn is extra weight.

when you could simply plumb it in just before your normals CAT

and you have no issues what so ever, and you save piping/weight and space

Link to comment
https://www.sau.com.au/forums/topic/70955-screamer-pipes/#findComment-1310392
Share on other sites

However, even though you pass the noise test you may not be legal still unless you adhere to the standards regarding how far back and where you are allowed to vent exhaust gases.  In the ACT i am prett sure you are *only* allowed to vent exhaust gasses out behind the rear bumper and are not allowed to vent at an angle.  Just something to think about.

In Vic I belive it's something along the lines of:

Behind the last openable window and on the drivers side

Link to comment
https://www.sau.com.au/forums/topic/70955-screamer-pipes/#findComment-1310410
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Apologies for the long post, but needed somewhere to lay out the entire timeline of events and actions taken:   I've got an 89 GTR with a R34 RB in it. It's been running great all year, driven probably 500KM in the last month. It's not my daily driver, just a weekend fun car.    Build info: R34 RB26 - HKS 2.7 stroker kit, HKS adjustable cam gears, HKS turbo upgrades, Trust intercooler, R34 factory DENSO 440cc injectors, JUN chipped/tuned R32 ECU. All of this work was performed in Japan back in 2019.    Thursday 10/2/25 - It's a nice day and decided I'll drive it to work, I start it up in the garage and I notice it took a few extra cranks and sounded a bit funny. I figure maybe it was just because it was a pretty chilly morning. I pull it out into the driveway to warm up a bit before leaving. As I leave the driveway, it feels very off and sounds like a misfire. I pull it back in the garage to deal with after work and take the daily to work. I was able to diagnose it as a cylinder 5 misfire with the old spark plug test (unplugging each plug until a sound change with the engine running). I take off the whole ignition system, ignitor, plugs, spark. *Important note, it is still on the R32 ignition system with the separate ignitor system. I test each system with a multi-meter and nothing presents as a smoking gun. I put it all back together and it starts up no issue. I go ahead and order the PRP R35 ignition conversion kit. It should arrive today (10/13/25)   Friday 10/3/25 - Another nice day, car starts up great and drives great all day. Very pleased that everything seems to be OK   Sunday 10/5/25 - Decided I'll take it to play some golf, load up and drive to the course about 25 minutes away. Drives wonderful the whole way there, I pull in the parking lot and the engine completely comes to a stop. I do not recall if it sputtered at all, but just remember all of the sudden the engine was off. I roll it into a parking spot, try to crank it back on and nothing.  It'll crank and crank and not even try to start. End up getting it towed back to my house and push it up into the garage.    Items I have checked: Fuel in the tank Fuel Pump relay Fuel pump fuse  Spark Plugs & gap Coil packs Ignitor    I know the cylinders are getting fuel as the plugs smell like fuel after a start attempt. I tried spraying starter fluid into the manifold and cranking and not even a sputter.    I decided to do the live CAS test (removing the the CAS, ignition on and spinning the CAS stalk to see if the injectors pulse and spark is active). All of the injectors were pulsing and I have spark at the plug. The half-moon end of the CAS did seem very loose, I'm not sure how much play is supposed to be there, but it was more than I expected. There was no in/out play of the shaft, just the tip end that is pinned on had quite a bit of play.    CAS Play video   When I put the CAS back in, I stupidly did not re-time the engine. I know I need to do that tonight, however, I do not think it will start given it seemingly was not the issue. My plan is to do the PRP R35 coil kit and retime the engine at the same time.    I plan on ordering the Haltech Nexus Plug-in ECU once they are available again, but ideally would like to get this sorted before firing the parts cannon at it and potentially adding more variables.    Anything glaring that I am missing here, I'm a bit at a loss?          
    • Get it on a dyno. Get something logging Consult. Run it up and find out what is causing it.
    • Looking for a plenum for rb25 de+t neo  Not looking to push much power maybe 300kw at the wheels, is there much difference in flow for Freddy “Greddy style” compared to original Greddy or options like Proflow or Otaku garage?    I won’t be porting the de Neo head for now as I think it’ll be fine 280-300rwkw but appreciate the help and any experiences anyone has between them and any advice. Thanks  Looking at this plenum for now below 
    • engine wise almost no mods: stock ecu Greddy front mount intercooler Greddy forward facing intake w R33 TB stock fuel system, stock injectors, rail etc. Kakimoto racing hyper 3 inch exhaust system Apexi intake filter New NGK –R BCPRES (.8 gap) plugs  
    • Nice one @Pac - looks like a fair few 1600's there! 
×
×
  • Create New...