Jump to content
SAU Community

Recommended Posts

Stay away from it it dont steam, and once my seats are dry i might be able to tell you if it cleans......might.

I did what it said, spray area, pull trigger, rub back and forwards 2 or 3 times then release trigger for super fast dry action. Rubbed back forth 2-3 times.....after $6 worth on one spot of "super fast drying action" moving back and forward i gave up...

You could achieve similar results by throwing a bucket of water in your interior.

My seats are wet, i spent 1hour with sis hair dryer drying them out best i could, hopefully its sunny tommorow!

Moral is - IT dont work!, Dont try it!

Link to comment
https://www.sau.com.au/forums/topic/71024-steam-cleaner-at-fyshwick-car-wash/
Share on other sites

Who do you complain to its all coin operated unmaned?

I now have water marks/stains around the edges of the seats. And all i wanted to do was put a nice finsihing touch on a sucesful install of my full GTR interior :cheers:

Im planning on lodging a complaintive letter.

Just complain. They will probably get it detailed for you. I had a car wash incident similar to that and they made it all good.

Oh these places usually are manned in business hours and if not the contact number is usually on the service door.

You shouldnt use those dodgy interior steam cleaners, I was a car detailer for over 2 years and I will only use something like a Britex with proper interior shampoo, its not a steam cleaner it a wet vac = better results, quicker and if you get a couple of mates together and hire one from Woollies and do all your cars its pretty cheap.

If you want the easy way out go to Advanced car detailing in Phillip and get an apolstery clean for around $100 <--- Its worth it if its really grubby!

The interior isnt that bad, i just was so pleased with my self with a sucessful change over from stock gts to complete gtr that i thought i would top it all off with a nice lil stema clean........

This at car lovers?? i used it to clean my whole interior, did a mad job, for only $10!

Maybe it was broken or something?

Must be, coz this was terrible, did everything but clean, i now have water marks all over the seats :D

I must admit, it didnt remove everything, but it cleaned off the marks that a vacuume cleaner couldnt clean off (chocolate icing powder) and did an awsome job of it... unlucky to hear about your experiance, wouldnt suprise me if it was broken as so many people treat others property like shit!!!

Sorry 2 hear about your watermarks man

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...