Jump to content
SAU Community

Recommended Posts

R34 GTT upgrade parts for sale:

- TD06-20G Turbo with oil lines $1500

-SARD 800cc injectors with collars (top feed low impedance) $850 = SOLD

-Fuel Rail with injector loom $150 = SOLD

-Intake manifold and Plenum (note: intake manifold runners are R33) $450

Am located in Perth,buyer to organise and pay for freight if applicable. Discount available for package deal.

Cheers,

Michael :rofl:

Link to comment
https://www.sau.com.au/forums/topic/71091-r34-partstd-06-20ginj-etc/
Share on other sites

  • Replies 49
  • Created
  • Last Reply

Top Posters In This Topic

you would need the fuel rail and also the injectors are low impedance and therefore would need resistors etc...all pretty straight forward....this setup previously on R34GTT before removed and converted to RB26....

Cheers,

Michael

R34 GTT upgrade parts for sale:

- TD06-20G Turbo with oil lines  $1500

Am located in Perth,buyer to organise and pay for freight if applicable. Discount available for package deal.

Cheers,

Michael :P

interested in turbo, is it a direct bolt onto stock manifold? and does it need any water lines? Does the turbo have shaft play?

cheers Michael

could you please pm me details thankyou by the way i am in perth , if possable could i come around and have alook at the turbo?

so is this turbo sold? what rmp would i see full boost at on an rb25? also some more pics of the unit would also be appreciated. thanks. alex

still for sale...several keen though....rpm,3500 to 4000 rpm pics to your email??

Cheers,

Michael

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • This car has run before on this z32 ecu can get the part number for you, I have tried with no AFM it didn’t change anything, I compression tested today 140-150 across all 6 cylinders, also set fuel pressure to 43psi. The only weird thing was cylinder 1 plug was black and fouled other 5 cylinders were just wet with fuel. Spun cas by hand and confirmed injectors are clicking 
    • Since you came here to ask for help, have you thought about answering our questions, that might help us lead you to why it was skipping, or have you given up on getting advice?
    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
×
×
  • Create New...