Jump to content
SAU Community

Recommended Posts

Hi Guys,

When I'm travelling down the freeway doing 100km/hr , yes I do occasionally stick to the speedlimit, and transfer from 4th to 5th then I get a vibration in the car at any non-idle revs.

I have a twin-pate clutch in the car and the vibration feels similar to when the plates knock together if you have the revs too low and are going to stall. I don't think it is suspension related as in 4th doing the same speed it doesn't occur.

I have a couple possible theories that I would like people to comment on if they have had similar experiences:

1. Could it be the synchros in 5th gear?

2. Could it be the diff?

3. Could it be the clutch?

4. Could it be the lightened flywheel?

I had heard that if you get a lighter flywheel then the harmonic balancer may need upgrading, I have no idea about this so would be grateful for any feedback.

Thanks.

See'ya:burnout:

Link to comment
https://www.sau.com.au/forums/topic/7114-drivetrain-vibration/
Share on other sites

I have a vibration from 100 to around 120km's.

It was there with the std flywheel and now its still there with the lightened flywheel.

Maybe the Tail shafts center bearing?

Its only in 5th gear though?!?!

At the same rpm in lower gears the vibration is not there.

I also suspect my gearbox as it has had a input shaft bearing whine since i've owned it.

Possibly causing a little slack?!?!

Who knows.. :D

Thanks for the reply Joel and Fatz. No it doesn't vibrate in any gear other than 5th. I am leaning toward the flywheel as the culprit aswell. What did you do to fix the problem Fatz, have the flywheel balanced or have the harmonic balancer replaced?

Thanks for your help with this guys.

See'ya:burnout:

Hicks,

This is at the same time as I get the forged pistons in, bore the block and shotpeen the conrods. The benfits are that once it is balanced then I can rev harder, and it need to be done with the forged pistons as they weigh less than the factory items.

See'ya:burnout:

Since it only happens in 5th gear, then it seems logical that its something to do with 5th gear.

If it was flywheel or input shaft, etc, then it would likely happen in any gear.

My guess is a bearing on the 5th gear layshaft is on its way out.

Gtst-VSPEC

I have the SAME THING..!!!

Only I KNOW my 4-5th Synchro is rooted! It kicks back pretty badly. It's going in this afternoon to have it fixed, still got 3mth Stauatory warranty.

As mine only does it in 5th Gear, I too assume that it's 5th only... either way they're gonna fix it. I'll let you know how I go with it all.

-Kym.

Strich9ine,

Is your in the transition between 4th->5th or when it is in gear? Mine is when it is in gear, therefore I don't think it is the synchro, I think that it is either the 5th gear or the flywheel. Let us know how you get on anyway.

See'ya:burnout:

Originally posted by GTS-t VSPEC

Strich9ine,

Is your in the transition between 4th->5th or when it is in gear? Mine is when it is in gear, therefore I don't think it is the synchro, I think that it is either the 5th gear or the flywheel. Let us know how you get on anyway.

See'ya:burnout:

My transition from 4th-5th kicks back horribly... above 130km/h+ tho..and when changing quickly....

... then all of 5th gear i get that vibration noise....

hence i said before I KNOW my synchro is faulty, as it kicks back when changing... that may be causing the vibration in 5th gear ?

It's in for repair, I'm without a car for a few days :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...