Jump to content
SAU Community

Recommended Posts

who was the guy in the DR30 drifting at Calder on channel 10 today??

For those who didn't see it he got knocked out in the first round but it was great to see a DR30 competing.

I think channel 10 should have done more of a segment on it but I might just be a little bias.

There was only 1 non nissan which was a v8 holden ute.

Link to comment
https://www.sau.com.au/forums/topic/71372-dr30-drifter-on-channel-ten/
Share on other sites

It was Tom Monkhouse. His car is fuuuuuucking low, I swear it sits about 4 inches lower than mine.

The judging was shithouse going by a lot of what I saw today, he was pre-apexing better than the S13 and seemed to be getting the last corner better too.

His brother Jack runs in the ARC in a Galant, he usually shows up at SA drift days, used to bring his 180B rally car and then brought a VR4 converted to run rwd for drifting for one or two days at Mallala

It quite possibly could have been?? haven't heard a word about it how ever. Was it white absolutely dumped with 1800-nothing-suss stickers on it? I think there may have been a rally on over that weekend though because I heard this weekend he finished 1st over all in his newly aquired evo 8, not sure if that was this week or the week before. Spewin if it is.

Yes.... mine is rather high lol

But I havent had a cop look twice at it and I'm sure its the ride height

Tom's car has been slammed for almost as long as he has owned it 2 years now, I know because he got his the same week mine got complied. He has had one defect for bald tyres which he got of at the cop shop no worries.

Cops looked at my car a lot the day I drove it round with the gearbox and rails 50mm off the ground but that was just stupid and I didnt have the c-spanners to adjust my coil overs. I reckon my car got complied a lot lower than your car :wassup:

Tom's car has been slammed for almost as long as he has owned it 2 years now, I know because he got his the same week mine got complied. He has had one defect for bald tyres which he got of at the cop shop no worries.

Cops looked at my car a lot the day I drove it round with the gearbox and rails 50mm off the ground but that was just stupid and I didnt have the c-spanners to adjust my coil overs. I reckon my car got complied a lot lower than your car  :wassup:

yeah think he got done for no horn to within that defect....Whats he doing with the computers???

I remember how low your car was Josh looked tough but!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • So I'm going to have to keep ignoring the 4.7 update, or whatever version it is? Poop. I was hoping you'd put me out of my misery.
    • We have a huge update coming in the next few months, version 5 of Invision will be released. I'm holding off any changes until after this change as I'm not sure what features will be removed or introduced.
    • Yeah, plenty of air flow, there is a dedicated path that feeds the air in to the OEM intake tube behind the bumper As for a "tangible effect", maybe, but getting the pod/intake air out of the hot engine bay is worth it psychologically to me, even if it gives no performance difference, so the tangible effect in my Lizard brain saysss yessss  In the end, to me a tangible effect isn't always about performance, sometimes it a sound or a look, or even a...... feeling  Ooga-Chaka Ooga-Ooga Ooga-Chaka Ooga-Ooga Ooga-Chaka Ooga-Ooga Ooga-Chaka Ooga-Ooga
    • yeah first and reverse is where you will find clutch release issues (whether hydraulic or mechanical) because the difference in revs required is the highest there; particularly changing down from 2nd to 1st when still moving. To be clearer though, it is possible that the clutch release bearing is the wrong height. This is less likely than a hydraulic issue but it is not unheard of when you are mixing and matching
    • Quite right, if you make it to that pension you deserve every cent
×
×
  • Create New...