Jump to content
SAU Community

Recommended Posts

  • Replies 53
  • Created
  • Last Reply

Top Posters In This Topic

It certainly won't just bolt on. But i'm pretty sure it can be done. You will need to make up and adapter to go from the plenum to the head. Maybe do a search on the forums and see what you can find.

  • 2 weeks later...

Must sell!! Parts left include:

Complete head including stock cams - $1500

Oil pump - $150

Water pump - $50

Sump with no diff - $200

Intake plenum - $400

Adapter between throttles and head - Make an offer

2 x Exhaust manifolds - $200

2 x R34 GTR exhaust manifolds - $200

Turbo oil & water lines - Make an offer

Alternator - $80

2 x Stock AFM’s - $150

6 x Stock coil packs - $200

6 x R34 GTR coil packs and wiring harness - $200 (built in igniters)

2 x Cam covers - $200

the rb26 plenum will so not fit on a rb25 dont even try its closer to fitting a rb20 and thats still a really big job. I will take the inlet manifold ie. the bit that bolts between the throttle bodies and the head for $75+ freight???? Let me know also via pm your lowest dollar on the cam covers I PM's you a while back but have been interstate so could really get on to you sending them or anything sorry.

Daniel

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I just bent the ends of my premo plates. It even went through Regency like that after the engine conversion and the inspector (a great bloke!) just squinted his eyes and said "I didn't see that". Plates, and how they look, are just something that have zero importance to me.
    • Yeah, I would have said the same. It makes me suggest that there are other things wrong, such that the ECU is totally unhappy with the broken sensor. The only other thought here is that maybe it is shorted, which might cause a different issue to the typical "disconnected" sensor.
    • The fact that US/JDM plates actually fit the skyline bumpers properly is a big, big thing for me as they are the correct dimensions. Annoyingly you can't opt for a normal plate (or plate combination) in that size. You have to make up your own one, and at that point you'd still know it wasn't randomly assigned. 
    • Well, really, that's any ECU, because it's not so much the ECU that the tuner connects to, but a laptop that's connected to the ECU. You have to have the tuning software installed locally. The "remote" part is essentially just remote desktop (RDP) or VNC type access. Nevertheless, if you're looking to upgrade, then you're immediately in the Haltech/Link territory, both of which can be done by any number of competent tuners here in Oz. But without a dyno, you'll definitely also need a wideband O2 sensor fitted, and you'll probably be relying on "auto" tuning a bit, where you drive it around under various loads and then apply the corrections that the ECU learns (basically applying the fuel trims that the ECU has to do to correct the mixtures). Tuning the timing is a little harder. It can be difficult to trust the old OEM knock sensors on RBs, so it is definitely best to have someone who knows what they're listening for, with knock ears (a piezo microphone connected to the engine, and and little amp and headphones so the listener can hear the angry men with hammers who live in the engine). That is more difficult to do remotely, and I suspect the only sane way is to be quite conservative on timing. But that's OK. You're probably waaaaay better off with conservative timing where you are. What is the fuel situation? 98RON available? Or low grade jungle juice?
    • I see your point, I didn't think too deep into it, was purely focused on the price. There's no bad blood between myself and GSM, they acknowledged the price was cheaper else where and at the time couldn't match it. 
×
×
  • Create New...