Jump to content
SAU Community

Part Number For R32 Gtst Ecu, Please Help *urgent* Car Wont Start!!

bretto

By bretto,
in Engines & Forced Induction

 Share

Recommended Posts

bretto Proficient

bretto

Posted
Posted

Hi ppls

Ive been putting my car back together for a while now. Now that it is together, the damn thing wont start, we put new spark plugs in it last night and it doesnt seem to be getting any fuel, fuel pump is working but the injectors dont seem to be working at all. I need to check that i have an r32 gtst computer and not some random the fella i bought the car off picked up at the wreckers. So if anyone can help with a part number that would be greatly appreciated.

The codes written on the side of the ecu are MEC-R212 B 1X22 Those are on the front on a nissan tag. Also on the side is MEC-R212 B 06645

We pulled the spark plugs out and after trying numourous times to start it they were dry and had no signs of any fuel getting to them, also when we were trying to start the car and feeling the injectors you couldnt feel them pulsing whereas my mates car was very noticable, thats why we are guessing its the injectors.

Thanks guys.....Brett

bretto Proficient

bretto

Posted
  • Author
Posted

yeah im pretty sure the lines are on the right way, we pulled the line off to make sure there was fuel being pumped through. wouldnt the injectors still be pulsing to try pump fuel into the engine even if there wasnt any fuel there? coz they definitely arnt doing anything.

blind_elk Grand Master

blind_elk

Posted
Posted

One of the green relays down behind the ECU controls power to the injectors. Make sure that both relays (the other is for the coils) are switching on when you set the key to "ON".

Trace the fuel line from the FPR back towards the the fuel tank. If you run into the fuel filter, then the fuel lines are on the wrong way round. But that shouldn't stop the injectors pulsing.

While you had the plugs out, did you check that you had spark?

I have on old ECU, but its from a GTS4. The Nissan P/N is 23710 04U60 (It has MEC-116 A 9810 just above the "Hitachi" on the label)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Marek
      Hi everyone.

      By Marek · Posted

      Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • DanMac34
      R34 Speedo not working after manual swap

      By DanMac34 · Posted

      Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • joshuaho96
      Speed Sensor replacement

      By joshuaho96 · Posted

      Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • QB6SAGR
      Tein Circuit Master- rebuild worth it?

      By QB6SAGR · Posted

      Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...