Jump to content
SAU Community

Recommended Posts

Okay, i have some spare rims now, next thing on the Drift checklist is a helmet.

I just want something that's gonna do the job and not cost the earth.

Suggestions on what and, primarily, where to buy would be MUCH appreciated.

P.S. Forgive me if this has been discussed before but a quick search didn't turn up much of relevance.

Link to comment
https://www.sau.com.au/forums/topic/73458-help-please-buying-a-helmet/
Share on other sites

Hey Ash, i bought mine a couple of years ago at peter stevens yamaha, its a Shoei RF-R that i paid about $400 for & does the job good. As long as it has that Australain standards sticker on the side, they'll let you use it at a drift comp.

Sam

Keith at Total Motorcycles...come off bridge rd onto research rd, then its the first right hand turn. Then go to the end of the cul de sac, and its in the gates on the right hand side.

he sells motorbike stuff, but has a few good cheap (new) helmets there. He doesnt charge like a cut pig as well.....

Dude.. ebay GO.. I looked into this for a friend the other day..  

http://cgi.ebay.com.au/ws/eBayISAPI.dll?Vi...4548416336&rd=1

http://cgi.ebay.com.au/ws/eBayISAPI.dll?Vi...4548952527&rd=1

If your looking to make a statement:

http://cgi.ebay.com.au/ws/eBayISAPI.dll?Vi...6530733022&rd=1

Im so addicted to ebay,....

I think I'd rather a new one cause I'll keep it for a while and know i have a good fit, but that WWI item is certainly tempting :rant:

Thanks for the otehr suggestions guys, I'll look in to it.

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
×
×
  • Create New...