Jump to content
SAU Community

Recommended Posts

  • Replies 45
  • Created
  • Last Reply

Top Posters In This Topic

parra or thonrnleigh maccas to  Central coast (say terriagle or avoka) would be good.  

... i used to have a house up there... wonder what state its in now :)

I live neer terrigal, but g/f lives out west..

So i will probley have another cruze from out west/sydney to terrigal and the central coast to meetup with the newcastle people and central coast people..

How does that sound... We will have the Krispy Kream Cruze and then in a month or less we have one from parra or neer that area to Terrigal.????

Any takes...

Also the Eastern Creek to KK is next saturday, do we have anymore participants...

Contact me or rstme for more details.

Cheers,

Sindows

lol guys this is a 20 min drive hehe

lets continue somewhere else after livo... livo is shit anyways

FAT Crew will come along with me (6-10 cars)

We can do that...

What cars will be comming with you?

Also everyone, remember to being your digi's and CB's

Cheers,

Sindows

Ok, so meeting at Eastern Creek....  

Does that mean the Maccas Eastbound? What time?

Meeting at the shell select servo ( corner of the Great Western Highway n Doonside Rd ) its just past mt druit on the GW HWY.

How does that suit...

Thought that would be easyest cause its on the way!

sindows: Can you please refer to the rules for posting in the events section as below

http://www.skylinesaustralia.com/forums/sh...ead.php?t=40114

Please update your first post with date, time and other relevant details about this cruise.

Thanks :)

sindows: Can you please refer to the rules for posting in the events section as below

http://www.skylinesaustralia.com/forums/sh...ead.php?t=40114

Please update your first post with date, time and other relevant details about this cruise.

Thanks :)

Is that better Blitz?

well if they'r all up for it then 2 350zs, FATRYD aerotop supra, Senator commie, done up new 323, done up IS200, done up FTO 2XCITE, Integra TypeR

and I'll take my line. will try to attend but dont guarantee every1 will come

well if they'r all up for it then 2 350zs, FATRYD aerotop supra, Senator commie, done up new 323, done up IS200, done up FTO 2XCITE, Integra TypeR

and I'll take my line. will try to attend but dont guarantee every1 will come

Sounds excellent, i know now to bring my camera, to get some pics of some sick ass cars and of course all the line attendees...

Cheers,

DarkZer0

You name will be on the list

might be at KK i'm not driving to eastern creek then driving back to KK  

i will be in touch with HANYOU

Hope to see you their haz....

Anyone else comming....?

If not see ya'll tomorrow night....




  • Similar Content

  • Latest Posts

    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
    • OK, next the shroud needs to come off and there are a couple of tricks. Firstly, there is a loom from near the passenger side headlight to the fans, coolant temp sensor etc and there is no plug to undo.  In my case I was OK to leave the shroud on top of the engine so I just undid the passenger side fan plug and about 10 of the clips which gave enough free wire to put it aside. The fan plugs were super tight, the trick I used was a small falt screwdriver to push down on the release tab, then a larger flat screwdriver to lever the plug out of the fan unit....be careful with how much force you apply! If you need to remove the shroud altogether for some reason you will have to deal with all the plugs (tight) and clips (brittle)....good luck. I removed all of the clips and replaced them with cable ties that I will just cut next time. Also, in the Red Sport / 400R at least, the intake heat exchanger reservoir hose is bolted to the shroud in 2 places with 10mm headed bolts; so remove them (the hose stays in the car; no need to undo it at the t fittings down at the radiator lower mount. Once you've dealt with the HX hose and the wiring loom, there are 3x 10mm headed self tappers holding the top of the shroud to the radiator; remove those.   The shroud then lifts out of the bottom mounts where it sits on the radiator, up and onto the engine out of the way. Simples
    • Ok, disregard my “rate them” comment, sorry for my unrealistic input
×
×
  • Create New...