Jump to content
SAU Community

Recommended Posts

Hi people out there,

I was just wondering if anyone knows how hot their turbo's get. I know that this is a "how long is a peice of string" question but I am interested to know if anyone has gone for a drive or race perhaps and whacked a laser thermometer on their turbo just to see how hot it gets. Perhaps someone has read this info some where. If you have, then please tell...

Your tubo size and engine will make a difference in heat as smaller turbos run hotter, etc. Obviously, there would be an operating range depending on how hard you drive, etc. From what I understand the operating temp could be anywhere from 100 deg c to 1000 deg c! Anyone know?

Chriso

Link to comment
https://www.sau.com.au/forums/topic/73627-how-hot-is-your-turbo-do-you-know/
Share on other sites

lol are you having fun posting this on every single forum, saw it on boostcruising ust before, now here :P

Oops... Busted. :Oops:

:)

Yeah, bit of a forum hussy.

I had a tiny leak at my dump flange and needed to know how hot it get so I can get the right stuff. Looks like I won't need it anymore anyway as I found some loose screws... Still interesting to know though...

wow, you must be fast to jump out, pop the bonnet and look.

i've seen mine red but only on a dyno

i find it stays red for at least around 30 seconds and glows for a minute or so..

and yes i am usually quick, and when i have seen it i have been on a road in the middle of nowhere so no cars and is safe stop anywhere whenever :rofl:

Could be you're right. Damn hot anyway.

Means your trying hard enough :cheers:

btw a bit off topic but i wanted to ask you,

after u fitted the hicas lock bar, was there a difference in the weight of steering at any speed??

i ask this because im quite sure the steering weight varies depending on speed, and figure it might get stuffed up by locking the hicas..

Take a look in the tutorial , but the quick answer is yes it can get hard at low speed (40) due to the system being electrically variably loaded, according to speed. This is common but dissapears with extra caster.

I've had glowing turbo on stock r32 after hard mountain work.. I think its just a combination of having no dump pipe to dissipate the heat better, and the fact that the R32 turbo is pretty small. Could also be related to clogged water lines, but need to investigate this further.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I don't know it is due to that. It could just be due to load on track being more than a dyno. But it would be nice to rule it out. We're talking a fraction of a second of pulling ~1 degree of timing. So it's not a lot, but I'd rather it be 0... Thicker oil isn't really a "bandaid" if it's oil that is going to run at 125C, is it? It will be thicker at 100 and thus at 125, where the 40 weight may not be as thick as one may like for that use. I already have a big pump that has been ported. They (They in this instance being the guy that built my heads) port them so they flow more at lower RPM but have a bypass spring that I believe is ~70psi. I have seen 70psi of oil pressure up top in the past, before I knew I had this leak. I have a 25 row oil cooler that takes up all the space in the driver side guard. It is interesting that GM themselves recommend 0-30 oil for their Vette applications. Unless you take it to the track where the official word is to put 20-50w oil in there, then take that back out after your track day is done and return to 0-30.
    • Nice, looks great. Nice work getting the factory parts also. Never know when you'll need them.
    • Thanks @jtha7 I will have a look around tomorrow but it is a prick of a spot. These are some photos i tried taking 
    • I take it that the knock retard is from bearings tapping a little tune? Thicker oil is a fragile bandaid. You need a much bigger oil cooler and probably the bigger pump being discussed.
    • Hi @Chupapy i had several leaks from coolant pipes being corroded, i also had one leak on back of the head onto transmission. For me that leak was from the turbo water line. Follow the line to the back of the head The hose and metal pipe had perished these are the best pics I took of it at the time
×
×
  • Create New...