Jump to content
SAU Community

Hi- mount or low mount

PALADN
 Share

Recommended Posts

PALADN Community Regular

PALADN

Posted
Posted

Guys im looking for a new manafold to put on my RB20det r32 gts-t. Now is hi-mount of low mount better? what are the advantages & disadvantages? also it has to fit a HSK2530 turbo. are these external or internal waste gates? also whats better internal or external gates?

Link to comment
https://www.sau.com.au/forums/topic/73749-hi-mount-or-low-mount/
Share on other sites
RyanN Rising Star

RyanN

Posted
Posted

the HKS 2530 turbos i believe have internal wastegates. internals aregood for smaller turbos, external wastegates are better for high-powered bigger turbos, an external wastegate allows for more exhaust gases to be vented (ideal for big boost applications). I've heard that a high mounted turbo is best, something about the oil doesn't gather within the turbo or something. A high mount gives you a little bit more room for a bigger turbo for example.

RyanN Rising Star

RyanN

Posted
Posted

go high mount. An external wastegate has a bigger valve which would vent alot more unwanted exhaust gases compared to usually a rather small internal wastegate, when you deal with more boost and power youre going to need an external.

Sydneykid Grand Master

Sydneykid

Posted
Posted

I would always got for low/rear mount in lieu of high/front mount as it puts the turbo in a better weight distribution position. Lower and rearward is definitely an advantage to the handling and braking performance. Plus it doesn't scream DEFECT, like a big shiny front mount in your face.;)

psybic Proficient

psybic

Posted
Posted
yeah but with an external waste gate how do you control the boost levels? do you set the springs for max psi (16-18psi) and then the bov controls the rest?

BOV does not control boost.

External waste gate has less creep because of above mentioned reasons.

Top mount is easier to get at.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      spot the stagea

      By Duncan · Posted

      roof rail delete used to be a thing, they were made locally for a while too
    • AnimalGarage
      spot the stagea

      By AnimalGarage · Posted

      I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • AnimalGarage
      Can you mount the ATTESA pump in other locations?

      By AnimalGarage · Posted

      According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • joshuaho96
      R34 25GT Engine Light 21

      By joshuaho96 · Posted

      It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • GTSBoy
      R34 25GT Engine Light 21

      By GTSBoy · Posted

      If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
×
×
  • Create New...