Jump to content
SAU Community

Hybrid COPY FMIC GROUP BUY - ONLY $220 EACH - VIC


Recommended Posts

Hi guys, it seems everywhere I look there is a buy for these copy hybrid coolers.

The intercooler is constructed entirely of high quality 6061 aluminum and

the core is 100% vacuum brazed. The polished aluminum end tanks are hand TIG

welded for a perfect fit. The ambient fin pitch has been adjusted to provide

an optimal fin density of 15 fins/inch. This gives the intercooler excellent

flow properties as well as a large cooling surface area, and the efficient

Bar & Plate core takes advantage of these properties.

The four threaded mounting points along the top and bottom of the

intercooler make installation simple. Typical installations require little

to no modifications to the vehicle.

Features & Specs:

a.. All TIG Welded 6061 Aluminum, polished end tanks

a.. 100% Vacuum Brazed Core

a.. High Efficiency Bar & Plate Construction

a.. Inlet/Outlet: 3inch

a.. Tested CFM: 1020 CFM

a.. Fin Pitch: 15 Fins/Inch

a.. Four Threaded Universal Mounting Points

a.. core size is 600x300x76

a.. pressure drop of 20psi - 17psi

a.. heat exhange of 72C - 24C

FMIC.JPG

FMIC1.JPG

FMIC2.JPG

FMIC3.JPG

FMIC4.JPG

NOTE:

These pictures were taken from a random intercooler, I have not gone out of my way to find one that is perfect, this is the one that was closest to me at the time.

(DO NOT USE THIS IMAGE ELSEWHERE - THESE ARE OF MY COOLERS)

Prices are only $220 pickup or $230 delivered to VIC, NSW, QLD, SA. Price will be $240 for WA and NT delivered.

A 50% deposit will be required as you place the order and remainding 50% when the cooler arrives.

INTERCOOLERS ARE NOW IN STOCK!!!

HOW TO ORDER

send me an email to: [email protected] with the following information:

* your full name

* your full delivery address

* your user name on the forum and the forum you are from

* number of units required

P.S I CAN ACCEPT PAYPAL PAYMENTS ON THESE BUT WILL INCUR A 3% SURCHARGE

Cheers

Greg

  • Replies 66
  • Created
  • Last Reply

Top Posters In This Topic

Unfortunately not :)

There is a group buy on piping on here at the moment for $450 for piping!!! I think this is a great deal and ill be getting my piping from there.. I think its Rhamanovski or something like that

Greg

Hi guys sorry about this i made an error and put a more expensive price up..

Prices are only $220 pickup or $230 delivered to VIC, NSW, QLD, SA. Price will be $240 for WA and NT delivered. Pickup is available from Werribee - VIC

As far as i know they dont whistle. I haven't had anyone tell me they whistle and haven't run 1 on my car. If it does whistle on your car then just pass it onto the next person for this price.

I WILL BE ABLE TO BEAT ANY AUSTRALIAN COMPETITORS PRICE!!!

I have 50 coming in stock within 21 days. Taking orders now!!

I have the cheapest prices in Australia on the same item as other people have!! Will beat any price!!

Cheers

Greg

The reason for copying the cooler is simple. Hybrid makes one of the best coolers around and there is a market for it. So a manufacturer copies it and sells it off to people like us for 1/4 of the price :P.

The reason for copying the cooler is simple. Hybrid makes one of the best coolers around and there is a market for it. So a manufacturer copies it and sells it off to people like us for 1/4 of the price :P.

Thanks mate ;)

Greg

The sky is blue because

The blue color of the sky is due to Rayleigh scattering. As light moves through the atmosphere, most of the longer wavelengths pass straight through. Little of the red, orange and yellow light is affected by the air.

However, much of the shorter wavelength light is absorbed by the gas molecules. The absorbed blue light is then radiated in different directions. It gets scattered all around the sky. Whichever direction you look, some of this scattered blue light reaches you. Since you see the blue light from everywhere overhead, the sky looks blue.

:P

yeah i already put my order in for 2 coolers...

does any know where to get 3 inch piping kits for r33 GTS sII and s15??

i know there is a group buy here but they are 2.5 inch...

Get em made at any exhaust shop using mild steel and use silicon hoses to join em? that's what I'll be doin anyways. The wholesaler that these intercoolers come from just started selling silicon hosing as well... EXAUNV, you might wanna check on that.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
    • The annoying part about neglect, is when you start to replace one thing, and find ten more broken things. Ham fisted monkey repairs you normally only find out about when trying to do something unrelated! Ha ha   Neglect you can kind of anticipate the huge costs to fix it all. Ham fistedness is normally a shock the first time your work on a new old car, as everything "looked" good before.
    • For DBA, check out their guide table here. https://dba.com.au/wp-content/uploads/2023/01/Direct_Replacement-Guide-2021.2.pdf   Additionally they have some other guides and info on how to make sure you choose the right pad.
×
×
  • Create New...