Jump to content
SAU Community

Recommended Posts

  • 5 months later...
Hi all

Recently have a problem with the car

When the car is idle, it would sometimes shudder/shake for about 1/2 second

This can occur randomly at idle and makes no sounds

Any suggestions at what it could be ?

Thanks

Eric

Got the same problem with my 34 GTT. It only seem to show when car is warmed up. When the oil temperture pass 90 degree and sitting idle the random shake and you can hear spluttering sound from the exhaust.

Link to comment
https://www.sau.com.au/forums/topic/73847-shudder-at-idle/#findComment-1649392
Share on other sites

have had this shutter too for about 2.5years

only appears when the engine is warm, and is worse when the engine is hot

...but doesn't seem to be so bad when its a cold day

tried to change:

- afm

- spark plugs

- all coils

- ignitor

- fuel filter

- tried fiddling with wires to see if its an electrical problem - no luck

- had injectors cleaned about a year and a half ago

also tried cleaning IAC, fiddling with throttle switch, and cleaning the intake manifold with some carby cleaner all with no luck

if you find what it is, then i will have sex with a monkey

Waz.

Link to comment
https://www.sau.com.au/forums/topic/73847-shudder-at-idle/#findComment-1653257
Share on other sites

have had this shutter too for about 2.5years

only appears when the engine is warm, and is worse when the engine is hot

...but doesn't seem to be so bad when its a cold day

tried to change:

- spark plugs

- all coils

Waz.

hmm. bugger. so changing the coil didn't fix the problem. I was seriously thinking of picking up a 6 pack splitfire coil n replace them all and hoping for problem solved. But I guess I will have to look else where.

Anyone else got the same problem and had it sort it out?

Link to comment
https://www.sau.com.au/forums/topic/73847-shudder-at-idle/#findComment-1662449
Share on other sites

Mine has started doing it in the last week or two... Just a quick shudder and a gurgle from the stock exhaust system. Only when warm.

Interesting! I thought I was due for new spark plugs, cause it sounds like an occasional miss.

Do 34's have the ignitor in the ECU or engine bay?

Link to comment
https://www.sau.com.au/forums/topic/73847-shudder-at-idle/#findComment-1666968
Share on other sites

Hmm.. and it is the same on my series 2 R33.. Wondering if it is getting too hot where it is and not igniting properly sometimes? Anyone with a series 1 R33 experiencing the idle shudder?

Also, Ed... does that free ipod thing actually work? I've seen the same scheme for car head units. =-]

Link to comment
https://www.sau.com.au/forums/topic/73847-shudder-at-idle/#findComment-1669617
Share on other sites

Hmm.. and it is the same on my series 2 R33.. Wondering if it is getting too hot where it is and not igniting properly sometimes? Anyone with a series 1 R33 experiencing the idle shudder?

Also, Ed... does that free ipod thing actually work? I've seen the same scheme for car head units. =-]

I have an R33 S1 and it's also affecting me. It only used to happen a poofteenth before I got my atmo BOV and now it does it pretty hardcore. Unless I leave it for 4 hours between drives. If I warm up the car for 5 mins in the morning I'm fine. It's when I stop and start the car (like doing grocery shopping or something) that it happens most

has anyone used the the eletronic idle stabiliser?

Clicky

Does it work?

Someone mentioned that another result of shutter is also loss fuel economy... Will this also fix that ? I

Link to comment
https://www.sau.com.au/forums/topic/73847-shudder-at-idle/#findComment-1670156
Share on other sites

I was going to have a guess and say; since my O2 sensor doesn't appear to be working properly, and the ECU is running richer at idle/low revs, that possibly it is backfiring on too much fuel?

I hope this is not just an uneducated guess, and i'll soon see when my NGK O2 sensor arrives.

Incidentally, i'm also running an aftermarket BOV. How's your fuel economy, Kennedy?

Link to comment
https://www.sau.com.au/forums/topic/73847-shudder-at-idle/#findComment-1670302
Share on other sites

I was going to have a guess and say; since my O2 sensor doesn't appear to be working properly, and the ECU is running richer at idle/low revs, that possibly it is backfiring on too much fuel?

I hope this is not just an uneducated guess, and i'll soon see when my NGK O2 sensor arrives.

Incidentally, i'm also running an aftermarket BOV. How's your fuel economy, Kennedy?

Well my fuel gauge doesn't work so I can't be sure. (Gotta fix that). I fill up every 200KM anyway coz I believe cars in general run more efficiently on a full tank. By my rough calculations...since the BOV intall by I can only get about 400KM rather than 450KM to a tank. It is a 65L tank isn't it?

Link to comment
https://www.sau.com.au/forums/topic/73847-shudder-at-idle/#findComment-1670436
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Will have a look at that. I cant see any leaks 
    • Put another overflow bottle (ie, a 1.25 coke bottle or similar) under the overflow hose and see if it is being pushed out there or if it is disappearing into the engine.
    • Staring on a stand is no issue. You just have to wire everything up, give it fuel and cross your fingers that the stand is robust enough. Arranging the inlet plumbing is often the hardest part, without any surrounding structure to hand some of it from. No need for coolant if you only want to run it for <1 minute. As to the gearbox - I think the little Aisin box is a bit stronger than the other small Nissan boxes that went behind SRs, but I wouldn't be too keen to test its limits with the torque of a boosted 25. I don't know if you can retain the box and the tailshaft. The box won't connect to the RB without an adapter of some sort, which is either a plate that will push the engine forward (which is not good for fitting it into the bay's available space) or push the box back, which messes with the box position and tailshaft length - OR - cut and shut work on the bellhousing, which is a long way from "least modification". I'd be buying a new 370Z 6 speed or similar, doing what has to be done to that to make it fit RB (ie, cut and shut bellhousing) and the requisite tailshaft custom/mods.
    • Hi Everyone I am from West Pennant Hills in NSW. Been too busy until recently to attend to my RB25DET Series 2 engine until recently. I am planning to stick it into the S15 shell at this stage, unless a nice SR20DET turns up... For now, i am going to try and get the RB25 running and working well then decide what gearbox to use. My preference is to retain the SR20DET  6 speed gearbox and tail shaft to retain as much and least modifications as i can avoid. I am an old guy and won't be doing any heavy drifting so i don't need a bullet proof gearbox Does anyone have experience with starting the RB on a stand? I got everything setup as much as I can with the info i can find... endless searching and videos on Youtube I would be great to get some pointers Cheers Songo
    • Hey all, Recently have had my s1 r33 gtr serviced and noticed my coolant reservoir was topped up to the max line. Took the car out for 1 yesterday and noticed today the reservoir is completely empty.  Any ideas? Radiator is full
×
×
  • Create New...