Jump to content
SAU Community

Recommended Posts

  • 5 months later...
Hi all

Recently have a problem with the car

When the car is idle, it would sometimes shudder/shake for about 1/2 second

This can occur randomly at idle and makes no sounds

Any suggestions at what it could be ?

Thanks

Eric

Got the same problem with my 34 GTT. It only seem to show when car is warmed up. When the oil temperture pass 90 degree and sitting idle the random shake and you can hear spluttering sound from the exhaust.

Link to comment
https://www.sau.com.au/forums/topic/73847-shudder-at-idle/#findComment-1649392
Share on other sites

have had this shutter too for about 2.5years

only appears when the engine is warm, and is worse when the engine is hot

...but doesn't seem to be so bad when its a cold day

tried to change:

- afm

- spark plugs

- all coils

- ignitor

- fuel filter

- tried fiddling with wires to see if its an electrical problem - no luck

- had injectors cleaned about a year and a half ago

also tried cleaning IAC, fiddling with throttle switch, and cleaning the intake manifold with some carby cleaner all with no luck

if you find what it is, then i will have sex with a monkey

Waz.

Link to comment
https://www.sau.com.au/forums/topic/73847-shudder-at-idle/#findComment-1653257
Share on other sites

have had this shutter too for about 2.5years

only appears when the engine is warm, and is worse when the engine is hot

...but doesn't seem to be so bad when its a cold day

tried to change:

- spark plugs

- all coils

Waz.

hmm. bugger. so changing the coil didn't fix the problem. I was seriously thinking of picking up a 6 pack splitfire coil n replace them all and hoping for problem solved. But I guess I will have to look else where.

Anyone else got the same problem and had it sort it out?

Link to comment
https://www.sau.com.au/forums/topic/73847-shudder-at-idle/#findComment-1662449
Share on other sites

Mine has started doing it in the last week or two... Just a quick shudder and a gurgle from the stock exhaust system. Only when warm.

Interesting! I thought I was due for new spark plugs, cause it sounds like an occasional miss.

Do 34's have the ignitor in the ECU or engine bay?

Link to comment
https://www.sau.com.au/forums/topic/73847-shudder-at-idle/#findComment-1666968
Share on other sites

Hmm.. and it is the same on my series 2 R33.. Wondering if it is getting too hot where it is and not igniting properly sometimes? Anyone with a series 1 R33 experiencing the idle shudder?

Also, Ed... does that free ipod thing actually work? I've seen the same scheme for car head units. =-]

Link to comment
https://www.sau.com.au/forums/topic/73847-shudder-at-idle/#findComment-1669617
Share on other sites

Hmm.. and it is the same on my series 2 R33.. Wondering if it is getting too hot where it is and not igniting properly sometimes? Anyone with a series 1 R33 experiencing the idle shudder?

Also, Ed... does that free ipod thing actually work? I've seen the same scheme for car head units. =-]

I have an R33 S1 and it's also affecting me. It only used to happen a poofteenth before I got my atmo BOV and now it does it pretty hardcore. Unless I leave it for 4 hours between drives. If I warm up the car for 5 mins in the morning I'm fine. It's when I stop and start the car (like doing grocery shopping or something) that it happens most

has anyone used the the eletronic idle stabiliser?

Clicky

Does it work?

Someone mentioned that another result of shutter is also loss fuel economy... Will this also fix that ? I

Link to comment
https://www.sau.com.au/forums/topic/73847-shudder-at-idle/#findComment-1670156
Share on other sites

I was going to have a guess and say; since my O2 sensor doesn't appear to be working properly, and the ECU is running richer at idle/low revs, that possibly it is backfiring on too much fuel?

I hope this is not just an uneducated guess, and i'll soon see when my NGK O2 sensor arrives.

Incidentally, i'm also running an aftermarket BOV. How's your fuel economy, Kennedy?

Link to comment
https://www.sau.com.au/forums/topic/73847-shudder-at-idle/#findComment-1670302
Share on other sites

I was going to have a guess and say; since my O2 sensor doesn't appear to be working properly, and the ECU is running richer at idle/low revs, that possibly it is backfiring on too much fuel?

I hope this is not just an uneducated guess, and i'll soon see when my NGK O2 sensor arrives.

Incidentally, i'm also running an aftermarket BOV. How's your fuel economy, Kennedy?

Well my fuel gauge doesn't work so I can't be sure. (Gotta fix that). I fill up every 200KM anyway coz I believe cars in general run more efficiently on a full tank. By my rough calculations...since the BOV intall by I can only get about 400KM rather than 450KM to a tank. It is a 65L tank isn't it?

Link to comment
https://www.sau.com.au/forums/topic/73847-shudder-at-idle/#findComment-1670436
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • When you crank your car, and hit it with a timing light, can you see a steady crank timing?
    • Oh, forgot to add, A few months ago I was getting mixture codes and the car was using crap loads of fuel. You could smell the unburned fuel in the exhaust, it was crazy strong. Economy was over 17.5 l/100 and usually around 19. I smoked the engine and found a leaky CCV hose which I replaced and then I replaced my two pre cat O2 sensors, I also replaced the MAF. This fixed my mixture codes and improved my exonomy but I'm still 14 - 15 l/100 when pottering about town so something is still amiss. Throttle response is much better and it has more pep but I'd like to know why it's still so thirsty (and I'm hoping that whatever it is gives me a bit more poke).    
    • Car is on factory injectors/z32 maf/ q45 throttle body/ z32 ecu with nistune 
    • Hello all, currently finishing up a rb25 swap into my s14. Having issues with starting, car has spark (confirmed by pulling a plug and watching it spark), has fuel(confirmed by checking pulse/voltage at injectors all spark plugs are soaked in fuel). Car cranks over and pops into the exhaust with a heavy fuel smell but no attempt to start or run, I have torn the timing cover off and triple confirmed timing, turned the CAS in multiple spots both directions, attempted to start with coolant temp and maf unplugged, checked my fuel lines and made sure they weren’t backwards, checked voltage at cas/injectors/coilpacks, made sure all the grounds in the harness are connected and added a few grounding straps (1 from chassis to block, 1 from chassis to head, and 1 from chassis to igniter chip) I am getting stumped here. As a last ditch effort I made a full grounding harness tonight that’s going to run from the battery and add an extra ground from the battery onto the coil pack harness/igniter chip/ intake manifold/ Wiring specialties harness ground/ and alternator. I’m hoping maybe the grounding harness will fix it here but posting here to see if anyone has any other ideas on what else I can check. My fuel pressure is unknown right gauge will be here tomorrow.  IMG_3206.mov
    • yeah I was shocked when I checked my spare OEM on and as below that's how they come from Nissan. (side interesting note new NEO gearbox and replacement park lack the brass bush on the tips and its just all alloy) unsure about damage to the box currently back at 1110 to be pulled down/inspected and selector fork replaced as he built it previously and given the never before seen failure on his billet forks he is replacing it under warranty. He said he has used always OEM the keyway tab without issue for years so it could be an unlucky coincidence. I did talk to him about the sharp corners and stress concentration too. Re: hard shifts i got 7+ years out of the OEM one and the fork itself failed not the keyway. so could be bad luck as I said or an age thing + heat cycles in box and during fabrication of billet?
×
×
  • Create New...