Jump to content
SAU Community

Recommended Posts

Hey guys,

Can't really tell if its always done it and I've just had the stereo on but when I trail of the throttle a little at around 90-100 in 5th I can hear a whine from the tailshaft/diff area.

Can't be sure what it is. Full throttle it goes away, just rolling with no throttle it goes away? Strange, is it possible the gear box is low on oil or something?

They should put dip sticks in gearboxes :D

any help appreciated, cheers!

Link to comment
https://www.sau.com.au/forums/topic/73894-r32-gtst-driveline-whine/
Share on other sites

Yeah that's typical of RB20 gearbox's. Suggest draining the oil and checking for any out-of-the-ordinary metal and if all is OK, filler up with Redline Shockproof Oil and forget about it.

With these box's the noisy parts are the revers idler gear and moreso the input shaft bearing. If you use the Redline Oil and treat em with some respect they can last a VERY long time ( with the noise ).

Hi, thought I would add to this, and perhaps shift perspective.

I have an r32 GTST auto, and have the same issue. I think its not actually to do with the gearbox but rather the diff. It would suprise me if both the manual and auto had the same issue, I think they are made by different manufaturers anyway. Mine is a Jatco 4 speed.

Other reason is, my father in law is a mechanic and he said it was diff noise, so I trust him.

I'm not too worried at the moment as its not too noisy, but, if it gets much worse I might do something about it.

Yes, tell a lie, I believe Rowdy's and mine are the diff. He got his "serviced", which seemed like an expensive fluid change on hindsight, and which did exactly SFA on the noise front.

I rarely hear mine over my exhaust anyway so it doesn't bother me. :rofl:

Change your diff oil , it only takes 2 litres or less. You will want to use Castrol EPX 80-90. Otherwise I would suggest for all of you that you get some Redline Shockproof. It is pretty much the best you can get but is fudgen expensive so I suggest getting in contact with a rep if you can and see if you can buy it through him/her.

Thanks fellas, is diff/gearbox oil changes part of the 100K service? Mine has the timing belt sticker, all new ancillaries belts and a new o2 sensor. Is it safe to assume the gearbox and diff were done too?

How much are we talking for a gearbox and diff oil change. I can't really say I feel like changing them myself.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...