Jump to content
SAU Community

Recommended Posts

Hey, i was just browsing Nengun's website and came across these gauge pods, i have never seen or heard of these before but am interested in gettin some for my 32, anyone here have them or a pic of them on the car coz i have googled for ages and can't seem to find anything on them

they are some "Mud Shell" brand or something...

cheers.

Link to comment
https://www.sau.com.au/forums/topic/73948-mud-shell-gauge-pods/
Share on other sites

Ken, I've seen the 33 ones and thought they looked pretty good. they sit in the middle angles towards the driver. where do the R32 ones sit?

The R32 ones sit on top of the instrument bezel and curves over the lh side next to the wiper switch.

Our Targa Prepped R32GTR has one on but it's in Tassy atm so no pics sorry.

These ones are made from injection moulded plastic with a stippled finish on them and all that is required is 2 or 4 small screw holes in the dash. As the R33 ones sit below the w/screen line, they cant get defected for vision impairment.

They even come with some double sided tape but don't know how strong that would be.

cheers

Ken

We have one here for an R33 GTS-T and they sit on the middle of the dash.

$200 and it's brand new.

BTW, they do them for A31's as well.

Cheers

Ken

I'd love that.

Dono if it's worth $200 for it though, why is car stuff so ridiculously expensive? I might have to get contacts in japan to source it myself and see how much it costs.

all about the same price, $200 which isn't bad considering it holds 3x 60mm gauges and most pillar pods hold 2 and are around $150-$180 for good ones.

Cheers

Ken

can you get some that hold x2 or can one be cut / removed ?

On an R33 since you wont be cutting holes, You would have to route the cables along the base of the windscreen somehow with some black conduit or something.

Would love to see one fitted, I'll be happy to get rid of my pillar guage. (single 60mm pod, $60 from Rocket Industries)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The incentives are mostly the same, yes. Ethanol is cheap compared to the cost of doing 98-100 RON with crude oil alone. 87 to 93-94 AKI all with E10. In 2020 Canada mandated E10 as a part of their "renewable fuel standard" and is supposedly going to go to E15 in 2030. In California where there are only 8 refineries with two threatening to shut down next year it's been over 20 years now of E10 and 91 AKI maximum because there's just not enough refinery capacity or crude oil supply relative to the demand for premium unleaded fuel. And CARB's low carbon fuel standard means functionally none of the diesel available at the pump is made from crude oil anymore. It's almost all entirely 20% biodiesel blended with 80% renewable diesel (hydrotreated vegetable oil) now. The number of gasoline vehicles that support E15 or higher ethanol concentrations is surprisingly low, I can't imagine it being wise to play tricks like this without flex fuel sensors in most of the fleet.
    • It's almost certainly the same as the one next to it. Have a fish around amongst these hits https://www.google.com/search?q=surface+mount+transistor+m33&sca_esv=9cb49794e0b2005d&source=hp&ei=2vJ5aNjTB7Kw0PEPldnS8QM&iflsig=AOw8s4IAAAAAaHoA6qkfmF6XcygtrZ4Vu9f92NXF_RFd&ved=0ahUKEwjYqIPP7MWOAxUyGDQIHZWsND4Q4dUDCA8&uact=5&oq=surface+mount+transistor+m33&gs_lp=Egdnd3Mtd2l6IhxzdXJmYWNlIG1vdW50IHRyYW5zaXN0b3IgbTMzMgUQIRigATIFECEYoAEyBRAhGKABMgUQIRigAUjKCFAAWABwAHgAkAEAmAHfAaAB3wGqAQMyLTG4AQPIAQD4AQL4AQGYAgGgAuYBmAMAkgcDMi0xoAfMBLIHAzItMbgH5gHCBwMyLTHIBwU&sclient=gws-wiz
    • South Australia, which is hardly as far behind as the rest pf Oz makes out, and who is also not a paragon of progressiveness (read that as over-legislation) in the area of vehicle standards, has this to say on the subject: Adjustable coil-over suspension Aftermarket adjustable coil-over suspension components are suspension units that incorporate an external thread on the main body and corresponding threaded spring saddle that allows the vehicle's suspension height to be varied. If fitting aftermarket or coil-over suspension components you must submit an Application to modify a light motor vehicle form and a report from a light vehicle engineering signatory (LVES).
    • Hi all, Long time since I've posted here. Looking for some advice on what I can remove to further identify the cause of my issues.  I can move the passenger seat forward and back but the knob used to adjust the seat angle is pretty much free spinning, there's very little resistance.  Removing the side cover I can see that the chain is intact but the shaft for the adjustment spins without the gear attached to it moving.  What's my next step for disassembly here? Is this a common fault? Just being a little cautious as I didn't want to start removing bolts for a spring to fly out or something equally as stupid.  Cheers
    • Those above shitboxes, mediocre and above usually have a turbo strapped to them, hence the slightly higher octane is required.  
×
×
  • Create New...