Jump to content
SAU Community

Recommended Posts

My current turbo timer dead.......im planning to buy a new one and i was just wondering if there is a difference between them? if so whats the best one's to buy?

They are much of a muchness bro, Is the old one an auto countdown?

I had an old school one that just did the 1 to 5 min countdown.

I took it out and fitted a HKS type 2 timer, it does the auto detection of how long it should do for run down time!

also has a speedo, and rev meter, so it can do top speed hold/max rpm hold/QM times. what ever ya want.

it wires up with just a few more wires, one to the ECU for speed sensor, and tac sensor. and another to the handbrake!

and the timer works out how long to run by the revs and adds it all up to give a countdown time!

SO HKS type 1 for just a great timer, fully auto. but thats all it does

OR HKS type II for all the good shit :)

I can get them direct from japan for around $200 for the type 1

and $350 for the type II

I hope i helped in some way!

kezza

Link to comment
https://www.sau.com.au/forums/topic/74296-turbo-timers/#findComment-1365153
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...