Jump to content
SAU Community

Recommended Posts

Hay guys i was talking to a guy at autobarn hehe =)

iam getting one of those oddessy dry cell battarys 12V 1000 amp =)

and i was telling what kind of sound system i was putting in my car and he goes you should give your distributor a good service

bushes etc?

what did he mean by this? does it cost a lot to do this? and how does it help me lol =)

Thanks =)

Link to comment
https://www.sau.com.au/forums/topic/7461-distrubitor-battary-and-sound-system/
Share on other sites

I have no idea why they would say that. Distributor is related to ignition so unless your car is not performing properly then I wouldn't bother.

Only time you ever think about the distributor for audio purposes is interference where you simply hook up a $2 condensor (which is usually there to begin with anyway!)

Just out of curiosity, what are you putitng in (don't need detailed description unless you wanna provide it).

It is actually possible to kill an alternator with a big stereo. If you crank your stereo and the headlights dim, your alternator is copping a workout. I would consider a battery upgrade (which you no longer need :mad: ) and a capacitor.

I've seen a few of them dead from extremely high current draws. I don't know the physics of it all but I believe it's due to the stereo sucking huge power from the battery, then the battery loading up the alternator to replace that draw. When it happens a couple of times a second for minutes/hours at a time repeatedly, it's easy to see how this is not "a good thing"...

A capacitor (cap) is basically a very fast-acting battery, ie it stores charge, but can discharge this power much quicker than a conventional battery. The kind you'd use for a stereo installation is a much larger version of the caps you'll see on pretty much any electrical circuit.

  • 2 weeks later...

I've seen 'em those capacitors - always seem like a bit of overkill unless you are building some $10k monster system.

I dunno - i think the new battery is overkill and you might have got talked into it when not really required. It seems like a fairly standard system. Its not like you are running 3 x subbies, 3 amps, and 8 speakers or something.

The alpine amp shouldn't draw too much power, and even the sub shouldn't stretch it.

hehe thanks for the info

reason why i need a dry sell guys is becoz the battary has been moved from the engine bay to the boot and i cant have any hydrogen gases being released from the battary into the boot not legal i think so i had to 2 ways

1. i some out make a duck that lets all that shit out under the car

or i buy a dry cell

so my answer was dry sell hehe =)

they costing me about 300 to 350

guys the best battery i have encountered are the optima yellow top batteries they shit all over the oddysey for stereo use and no cap required the dump huge amounts of current but more impatrant is theyr AH rate is more than double the nearest oddesey equivalent

eg optima yellowtop CCA 950A

AH 95

oddysey 1200 CCA 1200A

AH 40

this basicaly means that the optima has more than double the storage capacity of the oddyssey.

an amp which produces 1000w rms draws approx 170A from a 12V source

the oddesey will last about 15 minuites at this rate with the car off

your altenator in a skyline produces 95A and thats above 2000RPM

at idle its only about 30A - 40A

you do the math as to which is the better battery

NOTE : the standard skyline battery is rated at 45AH

most proper battery retailers should have them.

in nsw i get them from battery world

just lookup your yellow pages

cost was about $400 but well worth it

iv got 2 amps hooked imto my setup about 1300w worth

and my dash lights never dim even with all headlights and tail lights on.

well i was speaking to this guy today about battary

and i told him i would be running 1000 ampliefer etc

and running the battry into the car i said i was planning on getting a dry cell

he goes you will kill it if you run your system and the car togeather

i said iam not ganna be running the system on while the car is off

he goes dosnt matter hehee.

and i was speaking to him in regards to standard hydrogen battarys and he said dont matter if they in boot no harm ?

so what you guys think

he said i should put a small battary in the engine bay for the car

and another battary in the boot for the sound system

etc

what you guys think?

or reconmend i should do

for starters...sounds like you talk to autobarn people too much...the only time they should speak is when you ask for a price...thats it...they try to put accross the image they know lots but they dont...(learnt from experience, and no, im not happy with them)

if this guy wasnt from there, well, he still doesnt know much and shouldnt be giving advice.

my 2 cents..

i recommend an oddessy. it did me well - 2 10's, 2amps, 2 sets of splits (all average power ratings) and it showed no sign of power loss ie. lights dimming while running. just make sure you use good wires/cables and connect everything well...solder the wires, dont just twist them.

basically in stereo terms, you get what you pay for, just shop around to make sure you arnt getting ripped!

optima's are very good, but maybe over kill for your system (your own choice) as long as your alternator is in healthy condition!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep that is correct. It allows you to adjust the short throw range from what I can tell
    • Car has been running great, I've put about 300km's of break in time on it. First thing that stands out with properly sealing rings is no more noticeable crankcase smell coming out of my catch can. This may seem insignificant, but the constant smell while driving around was infuriating. It's also nice to see my oil level remain stable. Two new issues have developed that I only noticed this weekend though. There's a very noticeable driveline vibration past 100kmh. I only noticed it now as I've been babying it under 100kmh in the backroads. This comes as no surprise as I'm running a one-piece shaft, and I paid zero attention to my driveshaft angle when I put everything back in. I also have a fair bit of voltage drop on hot starts. The starter audibly is forcing. No issues on cold start though. I must not have removed all the paint under my main block ground during assembly. I'll try and take care of both those issues this week once the kids are asleep.  I also received all the parts I was missing for my direct port setup. I will hopefully have pictures of that up soon. I'm hoping to get back on the dyno the week of June 30th as I'll be on vacation. I'm confident I should be able to make north of 500rwkw on pump gas and WMI. I'll go back again later this summer with E98, but I want to confirm my ethanol content sensor is working properly first. I've never seen it read anything but 11%. This makes sense for our 10% ethanol content pump gas here, but I would expect the occasional movement between fill ups. 
    • 75% complete. Will now need to get a new axle with 5x114.3 hubs and then figure out how to customize some mudguards for it once the wheels are on.
    • Trailer prep is underway... Lined up the wheel to get a rough indication of how it would sit Then removed all the bits (as far as possible) and gave the frame a light sand and quick lick of paint   Then added some carpet
    • okay, so I figured this out, removed needles and reinstalled after swapping the gauge face on my triple gauge for my ER34, all work and look good. I tried to do the same for the main cluster, but the main cluster gauge faces are dished, the replacement gauge face are flat, so due to the dish in the org face ,mounting backing plate (clear) and depth of the needle, the flat gauge face will not work. I notice that R34 gtr gauges are flat, appears to be different clear backing plate that aren't dished. are these available, or what have others done to install flat gauge faces?
×
×
  • Create New...