Jump to content
SAU Community

Recommended Posts

I had the classic old age R32 gtr experience the other day coming down the freeway. One of the turbo's decided to die leaving me with the unenviable task of deciding how to go about a fix.

I've got most of the bits and peices off now and by the looks the good old rear turbo has done a seal and the front one is not real flash either. Both have a nice little puddle of oil in the compressor housing although the rear one is more like a 'pool'.

I was kindly offered a second hand unit assuming one turbo to be shagged but, since I can see a fast repeat of my present situation and all the mucking around repaeted I am considering a rebuild on both. Just wondering if anyone has a place they have used and prices for going down this path. Alternatively if someone knows of a person getting rid of some standard R34 gtr units?

I'm not necessarily wanting an upgrade in power since the motor is a bit old and the budget for the support accessories is just not there.

Link to comment
https://www.sau.com.au/forums/topic/74687-gtr-turbo-rebuilds-in-perth/
Share on other sites

What's your budget? The R34 GT-R standard turbos are ball-bearing, but still have the ceramic exhaust wheel. You'll need to go to some form of N1 turbo for the steel wheel.

Here's a document outling most of the Nissan and Nismo GT-R turbos that were released and their specs:

http://www.ipixel.com.au/temp/nismo-turbins.pdf

Cheers

Brendan

Well, definitely give Grant a call. He rebuilt a set of N1's I had on mine that I sold ages ago. He can pretty much just rebuild but with a steel wheel instead as mentioned. While everythings off, it's a good change to replace dump pipes & front pipes too (if they haven't been already).

I use ATS in O'Connor.

He rebuilt, Hiflowed, and put bigger (t4) comp and exhaust wheels on my old VLT T3, lasted years (Still Going) & performed very well (340rwHP on 14psi) was about $1100 to perform.

Cant imagine it being any more $$$ to do similar to a GTR Turbo.

I rang him last week but he is on Holidays I beleive...?

A bit off topic..

But i was just wondering if you kind folk could give me some rough ballpark figures on pricing for fitting Turbos.

1. How much would it cost to re-fit a set of turbos (no more different than the stocks, ie just replacements)

2. How much to rebuild a standard GTR turbo?

3. How much would it cost to fit a full exhaust - turbo back?

4. How much roughly for 1 + 3 toegther from the same workshop?

5. How long will it take for #4 to take place?

- If any one could just give rough figures, from what you know / heard/ had done urself, etc. It would be greatly appreciated. All to a GTR btw, if i didnt make it that obvious :D

Thanks.

  • 3 weeks later...

just finished installing the new turbs.

I found that...

*the factory manifolds need porting and port matching.

*the factory dump pipes are crap, if your stuck with them they get some die grinding action too.

*brute force on the seized flare bolt water lines breaks them, I even tried a blow torch to no avail.

Now I've got some 700cc injectors on the way it's fast approaching tune time. I rang the boys at hyperdrive and they are snowed right under. I am happy for them but, i need a tune and since my first prefference for tuners is booked up does any one have a suggestion for another place that does datalogit power fc dyno tunes?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
    • What ECU are you running? This is probably the biggest question. If it's a PowerFC, I'd probably change the ECU and get something newer that will handle the injectors in a nicer way.
×
×
  • Create New...