Jump to content
SAU Community

Like To Show Off Your Gtr?

readyGO

By readyGO,
in Queensland

 Share

Recommended Posts

wrxkilla Mentor

wrxkilla

Posted
Posted

sorry for my stupidity - i got of fmy arse and searched and found in the timeslip registry...

Very good work. for an n1 rb26.

awesome time. it speaks for itself.

My goals are very similar for the gtr..... 11sec 1/4 with 120mph+

even though its not going to be a drag car type car.

Car: R32 GTR

Engine type and displacement: RB26, 2.6 LTR

Induction: Twin Turbo

Major modifications: AUTRONIC,AUTRONIC CDI

Tranny type: Manual

Tires: Street Radials

Horsepower: 474.0

60 foot time: 1.670

1/4 Mile ET: 11.180

1/4 Mile MPH: 126.00

Track Name: WILLOWBANK

giant Mentor

giant

Posted
Posted
sorry for my stupidity - i got of fmy arse and searched and found in the timeslip registry...

Very good work. for an n1 rb26.

awesome time. it speaks for itself.

My goals are very similar for the gtr..... 11sec 1/4 with 120mph+

even though its not going to be a drag car type car.

Car:  R32 GTR 

Engine type and displacement:  RB26, 2.6 LTR 

Induction:  Twin Turbo 

Major modifications:  AUTRONIC,AUTRONIC CDI 

Tranny type:  Manual 

Tires:  Street Radials 

Horsepower:  474.0 

60 foot time:  1.670 

1/4 Mile ET:  11.180 

1/4 Mile MPH:  126.00 

Track Name:  WILLOWBANK

hi there

i have to tell you, my mods are very similar.

n1 engine(as the engine was blown when bought the car)

autronic & autronic cdi

4" gonzo exhaust ( not to loud)

ppg 5 speed dog box ( this only went in a few weeks ago, as original box finally

let go, 11.1 done on standard box)

hks cams

bosch pump & larger injectors (think 770cc??)

fuel rail & reg

23 psi

tomei baffles

tomei metal gaskets

koyo radiator and thermos (week ago)

6 piston ap's 365mm rotors(2 weeks ago)

18" r34 wheels

hicas lock

recaro drivers seat & rails

interesting to note i actually went quicker when we dropped the power down,

back around 320rwkw as 60 foot was quicker than we had been achieving,

it was just easier to get off the line without wheel spin. the car has run through at 130 mph( but slower 60ft).

i think the new gearbox would get a 11 flat or very high ten, it is lightening

fast on gear changes now.

my car is being setup for circuit and sprints also, thats what makes them so good

great on the strip or circuit, or street.

hope to see you round some time.

cheers russ

wrxkilla Mentor

wrxkilla

Posted
Posted

yeah russ, thanks for that info i appreciate it.

im hoping for mine to be set up for ciruit and sprints also, with a few drags thrown in for fun! :P

cant wait for mine to land here.

Michael

NA_R33 Grand Master

NA_R33

Posted
Posted
Show me a better value for performance, handling, 4WD, track, curcuit, drag, street car out there and I'II buy it......

EVO's, and WRX's. Just cause they are 4WD doesnt make them all that... Reliability plays a big part in it. The most comonly destroyed RB engine is the 26 due to poor design from the factory.

Im not biased, i do own one, and from an owners point, i still say they are over rated, from driving instructers, and from mechanics they will all tell you the same thing.

WetGTR Proficient

WetGTR

Posted
Posted
EVO's, and WRX's. Just cause they are 4WD doesnt make them all that... Reliability plays a big part in it. The most comonly destroyed RB engine is the 26 due to poor design from the factory.

Im not biased, i do own one, and from an owners point, i still say they are over rated, from driving instructers, and from mechanics they will all tell you the same thing.

Must admit I do have a thing for EVO's & WRX's. They are the only other cars that I like.

I guess the GTR, I believe has more potential when all factory problems are addressed.

I do agree that the RB 26 has some design faults that should have been adressed from factory.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • JC71
      98 R34GTT 4k engine stumble

      By JC71 · Posted

      forgot to mention that when it does this it does not kill the engine, but I have not kept the pedal down long enough to let it, as I see no reason to beat up on it as its got to be something simple, small and dumb causing this.  And as soon as I let off pedal, the engine returns to its normal super smooth operation and rpms re-stabilize quickly, once below 4k. 
    • JC71
      98 R34GTT 4k engine stumble

      By JC71 · Posted

      neither stumble or cut really seem to be an appropriate term....hard to explain its like a rev limiter but at 4k, but it violently shakes engine and entire vehicle as the rpms will not rise over 4k, even with slow acceleration. as soon as it hits 4k, it sounds like entire spark is lost entirely. plugs were 1.1 which I used as such, but later put in new plugs gapped down to .8 changed back after issue arose when I replaced the coils, still does it with either plug gap...damn and it was all running so good.
    • TurboTapin
      Why am I hitting a power wall with my stroked RB25?

      By TurboTapin · Posted

      Oh how times have changed! I actually lean it out relative to my water/methanol injector duty cycle. The methanol adds a lot of fueling and you can then lean it out even more due to reduced knock. 
    • Dose Pipe Sutututu
      Why am I hitting a power wall with my stroked RB25?

      By Dose Pipe Sutututu · Posted

      Yeah my thoughts are the same, a well thought out WMI setup, would be slightly ahead of just straight E85 and you're also chemically intercooling the charged air, dropping it even further. This is why you need to add so much more fuel as soon as you spray. I remember someone taking me through their set up before (Dennis, has a R33, lives around Cabramatta - no idea if he's still around on this forum). He would target AFR 10:1 on 98, then as WMI ramped on, AFR would lean back up to 11:1. Amazingly, he did this all through his PowerFC, a relay to cut power to his EBC solenoid if there was not enough line pressure on his WMI kit. And of course, if there wasn't any boost made above gate pressure, you wouldn't be accessing the load cells with heaps of timing for WMI. One downside to that rudimentary setup, once the WMI came on, the EBC would unleash the dragon, and of course all the timing. Tyres would fry lol.
    • MBS206
      RB25DET with solid lifters - which cams ?

      By MBS206 · Posted

      Shimmed or shimless, still solid, no hydraulic pump up stuff.
×
×
  • Create New...