Jump to content
SAU Community

Recommended Posts

hay guys as it says i need anew clutch,

On the weekend i went to the drags with ash and a few other boys and stuffed the clutch buy frying it hard and now slips after 4000 in any gear so what should i get?

i have a R33 gts-t running aroung 220rwkw when boosted back up

i would like to know where to get it fitted and how much a new clutch will cost in total( drive in drive out all fixed) yes i am in melbourne and will travel most places.

Willing to spend say $1000 all up for everything is that enough?

thank guys

( and yes i have read all the post on the patrol clutch and still are a bit unshore of that direction)

Link to comment
https://www.sau.com.au/forums/topic/75228-need-a-new-clutch/
Share on other sites

I just had one fitted. 5 puck sprung ceramic clutch with upgraded pressure plate. Was $850 all up.

The pedal is now lighter than stock (yes, lighter) and bites like hell. Shudders a bit without enuff revs but I spose thats always going to happen. PM Dr_Drift as he installed mine...

I just had one fitted. 5 puck sprung ceramic clutch with upgraded pressure plate. Was $850 all up.

The pedal is now lighter than stock (yes, lighter) and bites like hell. Shudders a bit without enuff revs but I spose thats always going to happen. PM Dr_Drift as he installed mine...

what brand is it?

is sam at his new shop yet?

All the Rumors aside **Nissan Patrol Clutch fits**

http://www.skylinesaustralia.com/forums/sh...ead.php?t=21958

will suit your car if its 1993 - 1995. should handle what power your throwing at it, work out a bit cheaper and have same pedal feel

i have some one a everlution R looking in to the clutch from the patrol if it does fit cos the part number from that tred does not match the books every one has, so he is going to find one and try to fit it and match it so i might buy one from him.

what brand is it?

is sam at his new shop yet?

In the PM he quoted a Nismo clutch plate but may have put a different one in (long story). The pressure plate is custom. It is very streetable. Like I said earlier, the pedal is lighter than stock.

He's still at XTC in Coburg.

In the PM he quoted a Nismo clutch plate but may have put a different one in (long story). The pressure plate is custom. It is very streetable. Like I said earlier, the pedal is lighter than stock.

He's still at XTC in Coburg.

cool, thanks paul

:cheers:

  • 2 months later...
i have some one a everlution R looking in to the clutch from the patrol if it does fit cos the part number from that tred does not match the books every one has, so he is going to find one and try to fit it and match it so i might buy one from him.

hey mate,

sorry to dig this up, but did you end up fitting the patrol clutch?

if so do you have part no. of the clutch fitted? also where did you get the work done and what extra parts were replaced (bearings etc.)?

looks like mine is going, trying to weigh up all my options

cheers

I bough one off Jim Berry in QLD. It uses a gtr pressure plate reworked to just under 4000lbs and a 5 puck centre was $1300 delivered with a machined flywheel. It feels great softer than the Nizmo twin plate that i stuffed and grabs hard.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
    • I believe @Duncan has given it a crack at Mt Buller before (in actual race conditions)
×
×
  • Create New...