Jump to content
SAU Community

Recommended Posts

I have been practicing my emergency braking lately after getting new pads and machined rotors and have noticed. my oil warning light will flash on for a second. Has anyone else seen this under heavy braking. I guess it is probably normal and nothing to worry about. I hope.

And yes my oil levels are correct.

Link to comment
https://www.sau.com.au/forums/topic/75339-oil-warning-light-when-heavy-braking/
Share on other sites

Thats not good, you are getting oil surge.

What type of oil are you running and how hot is the car when you are doing this because i wouldn't expect to have problems as the oil pick up is up the front of the sump and the oil would be sloshing to the front under braking.

Do you have a bent sump by any chance?

I am running redline 10w 40 and its happening when engine is at operating temp. Its a pressure light. My sump aint bent either. Has anyone else seen or heard of this happening.

Only happening under very heavy braking and just before i come to a stand still. And only for a second.

the light that always comes up on my 32 is the funny thing with heat waves coming of it... is that engine temp or something>>?? or the oil one... cus sometimes i'll just be driving and it comes on but it flashes irregularly... then i will restart the car and it'll be alright.. just depends... Can any1 help with this?>

I wouldn't worry unless you are unemployed.....a new cat can set you back 3-400.

As for the oil pressure light coming on...I would assume that while the engine is running you would only have 2-3 litres of oil in the sump at any one time, therefore, a VERY hard brake would send this oil flying towards the front. Even though the pickup is at the front, you can still fit 2-3 litres in front of it. I would say that BHDave is correct in saying you are experiencing oil surge. It only takes a split second for it to suck a small amount of air and the pressure drops to zero for a split second after that, hence the light coming on, until regular oil pressure returns.

I seriously think you don't have anything to worry about but if you are, take it to a mech who has an oil pressure guage and get your car tested.

Oil surge is pretty simple.....all the oil in a wet sump engine like an rb comes thru the oil pick up in the sump. It is in one place usually at the deepest part.

But as the car moves around (esp under high g forces) the oil can move around so much that there is no oil for it to pick up. Result...no oil to the pump and therefore not going around your engine. eeeek.

There are a heap of techniques to deal with this in Rbs such as bigger sumps, baffles and trapdoors in the sump, restrictors in the oil line to the head, foam in the cam covers, larger oil return galleries.

Under brakes is one of the biggest g forces most cars have, and if there is low oil level yhou might get this problem. I know you said your oil levels are correct which is why I didn't mention this first.

Also could be a problem with the oil pressure sensor? Perhaps get a workshop to add an extra oil guage as a first step if you are sure oil levels are OK.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...