Jump to content
SAU Community

Recommended Posts

http://www.mgccsa.org.au/vintagec.htm

Also, check the 'Hill Climb Sup Regs' PDF link on the left menu for more info.

I think the address is:

Collingrove Hill Climb

Lot 100, Hill Climb Road

Angaston Rural

This is where the WRX club use to have one of their track events, wish SA had an official SAU club.

Hillclimb - cool! I opened the Hillclimb Pdf, that indicates the Hillclimb to be on the following weekend 12 June 2005.. is that a second climb or the actual date? Let us know as I'm quite keen too

oops sorry, didnt check the dates there. The one 'jager' was referring to is this one - http://www.nissansilvia.com/forums/index.p...showtopic=91758

The track is 7kms SE of Angaston on the Angaston to Eden Valley Rd, if you get lost Im sure the locals in the Barossa can direct you.

OK, from town the easiest way is as follows.

1. Go straight up Main North Road

2. Go around the Gawler Bypass and keep heading along the Sturt Highway towards Nuriootpa.

3. You will come to a fairly major turn off to Tanunda on your RIGHT, via Gomersal Road (possibly Highway). Take this all the way to the end.

4. At the end turn LEFT onto the main street of Tanunda.

5. Continue down the street through Tanunda untill you come to a S-bend/railway crossing and turn RIGHT at the SECOND Road. (you want the one that is almost directly ahead, not the one back towards Tanunda)

6. Follow this road for a while ignore the first sign to Angaston(I've oly been that way at night so i don't really know it.) go over a train crossing and past the VINPAC factory on your right.

7. You will come to a cross intersection with a sign saying Angaston to the RIGHT , follow that. This will take you up the Main street.

8. When you reach the end of the main street you must turn RIGHT.

9. Follow this road past the Collingrove Homested, keep going untill you see a sign for the Collingrove Hillclimb on the left. Turn down the dirt road immediatly after the sign.

The gate to get in, is on the left, By this time you should have a pretty good idea of what's going on!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...