Jump to content
SAU Community

Recommended Posts

Hi

Currently I have 17inch rims with 235/45/r17 tyres (Nankang, hehe) and need to replace them as the tyres are causing steering wheel vibration at speeds over 110km.

I have come up with 2 options, which is 'better'

option 1

Buy 4 235/45/r17 quality tyres such as Dunlop SP3000, Michelin Preceda or possiblay SO3s

option 2

Get 18 rims 8.5" at the front and 9.5" at the rear with Hankook Venus Sport "K104" rubber. 235/40/18 front and 265/35/18 rear.

These rims will make the car look better too

Which option will give me better performance???

Link to comment
https://www.sau.com.au/forums/topic/75381-tyre-quality-vs-size/
Share on other sites

check out the maxxis victra in 235 /17 sold by bob jane. came out very well in the recent motor (wheels?) tyre test that included ost of the big name brands and tyre types, and half the price of most of them. 4th overall and there was nothing in the diferences really ie .06 sec through the slalom etc

check out the maxxis victra in 235 /17 sold by bob jane. came out very well in the recent motor (wheels?) tyre test that included ost of the big name brands and tyre types, and half the price of most of them. 4th overall and there was nothing in the diferences really ie .06 sec through the slalom etc

And thats not a lot???

For my 10 cents worth you are much better off spending your hard earned on a better set of tyres rather than set of larger tyres. The most marked difference will be in the amount of wet weather grip the tyres have - ie grip when you need it most.

By and large there are cheap tyres & there are good tyres.

If you want a set of 18 inch rims for looks then that is a completely different argument. Remember though, that for an equal quality rim a 17 inch set up will be lighter than an 18 inch. If you end up with a cheap 18 inch rim then it will be much heavier - to the detriment of your ride & handling.

And thats not a lot???

ummm...under the circumstances no, i don't think it is. we're talking six hundredths of a second slower, such a small amount of time that on any other given day it might have been six hundredths faster. i think that's bugger all. sure if you're trying to shave tenths each lap it's considerable but we're talking a $200 street tyre here. if you can justify spending twice the amount for a street tyre that's .06 sec quicker then either $ don't matter, you are always able to drive at warp speed or you need to drop your card to ferrari. the victra beat most of the better known brands in a lot of areas and all of them in others such as wet braking, which i'd have to say is pretty important in terms of keeping my car and hard stuff away from each other on the street where there are no run offs.

for some reason the noise test, in which the victra did very well, wasn't included in the points score. if you saw how close the overall results were you can't help but wonder why the noise result was left out of the points score.

i simply reckon they're worth a try on the basis of the test results.

cheers

ummm...under the circumstances no, i don't think it is. we're talking six hundredths of a second slower, such a small amount of time that on any other given day it might have been six hundredths faster. i think that's bugger all. sure if you're trying to shave tenths each lap it's considerable but we're talking a $200 street tyre here. if you can justify spending twice the amount for a street tyre that's .06 sec quicker then either $ don't matter, you are always able to drive at warp speed or you need to drop your card to ferrari. the victra beat most of the better known brands in a lot of areas and all of them in others such as wet braking, which i'd have to say is pretty important in terms of keeping my car and hard stuff away from each other on the street where there are no run offs.  

for some reason the noise test, in which the victra did very well, wasn't included in the points score. if you saw how close the overall results were you can't help but wonder why the noise result was left out of the points score.    

i simply reckon they're worth a try on the basis of the test results.  

cheers

:werd:

I read that test and it looks like that tyre gives by far the best bang for buck performance out of the group.

would be good if someone who had them could report on just how long they last as i think they could be quite a soft compound?

:werd:  

I read that test and it looks like that tyre gives by far the best bang for buck performance out of the group.

would be good if someone who had them could report on just how long they last as i think they could be quite a soft compound?

Hi Interloper;

my thoughts exactly, not sure about the wear but I've had Yokos go hard after about 60% wear so who knows. but at about $200 per tyre it's a chance i'm prepared to take.

Regards

Hi Interloper;

my thoughts exactly, not sure about the wear but I've had Yokos go hard after about 60% wear so who knows. but at about $200 per tyre it's a chance i'm prepared to take.

Regards

i will be after some in the near future, so let us know what your thoughts are if you end up buying them.

:(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ha, well, it's been.... a bit of a journey. Things have taken much longer than I'd hoped. I'll probably put up a thread at some stage. Hopefully soon. The car's not done any kms since my update in June though, put it that way.
    • Here's the chart for fuel pressure vs. current draw, assuming your base fuel pressure is 3 bar and you run like 0.5bar boost on WOT, you should only momentarily hit 9amps here and there. (Ignore my prev post, I cannot read a chart these days it seems)
    • Those comp test results are not hideous. Whether they are accurate or not (ie, when that comp tester says 140 psi, is the real pressure120, 140 or 160?) is unknown to us. The state of the battery used to crank it over is unknown, etc etc. Many people around here would say that the absolute values and the spread are perfectly fine to just add boost and keep going. I personally would be happier with a narrower spread than that, but even the diff between 125 and 145 is not terrible. That one cylinder at 125 though, has probably copped some damage relative to the others. You should inspect the valves seeing as you've got it open. Do you know how to measure installed ring gaps? That, and an inspection of the rings themselves, is how you will determine whether they need to be replaced. If you're not good to do these things, take the block and the pistons and rings to a shop that is, and ask them for the go/no-go on them. Do the bores need a hone at all? If so, you might well be justified in getting some different pistons in order to get away from the ring supply problem. Whether you're happy to spend a lot more money right now, on more gear, rather than less money, but an amount that looks stupid given that you will only get a handful of rings in exchange for that money, is for you to decide.
    • also possibly backed up to my filler and shat down it! 🤣
    • Ok so i would love some advice here please, i purchased an R33 a few months back and its had a few mods done to the engine, its an RB25det running a Master ECU, 1200cc injectors, bigger turbo, oil cooler, oil filter relocation kit, Spool H-beam rods, acl/ross pistons. When i removed the motor from the vehicle (as its getting a respray) i thought i would compression test it and these are the following results. Cylinder 1-145psi, Cylinder 2-143psi, Cylinder 3-125psi, Cylinder 4-145psi, Cylinder 5-140psi, Cylinder 6-135psi this test was done with the motor on the ground and powering up the starter motor. I dropped the sump and found broken oil squirters on cylinder 3,5 and 6. I was told my rings are probably worn so i stripped the motor completely to get a new set of rings for it. The trouble is no one has these rings anywhere and they have to be custom made by Ross over in the states and will cost about $600+$200 delivery. My question is how can i tell if my rings are at fault and if they are still ok and is this price ok for a set of rings?
×
×
  • Create New...