Jump to content
SAU Community

Recommended Posts

a questio for all of you guys who drive R32s. Is it a viable option for someone on a budget? i will have no more then $30k to spend on a car, i am thinking about importing R32 GTR. should fit my budget. but the question is, what is the general condition you get for a 32 model? i mean the car is arount 13-15 years old, so it is ...old! I dont want to buy a car and spend more money fixing it. i know there is always risk of something going wrong, even with brend new cars, but generally speaking. hope my question makes sence!

Could everyone please put down there personal experiences with imported R's?

Cheers, Vlad

Link to comment
https://www.sau.com.au/forums/topic/75417-r32-gtr-impression/
Share on other sites

  • Replies 42
  • Created
  • Last Reply

Top Posters In This Topic

Who has 10k spare?? YOU DO!

If you only spend $20K on the car, you have $10K spare don't you?

You can easily get an R32 GTR in the country and on the road for less than $20K. In pretty nice looking condition too. There are heaps on J-Spec for around $17-$18k landed and complied.

Then you get it, compression test it and do what you gotta do. For the extra $10K you got, you could have a nice reliable example. Just don't go for power before making sure its got good cooling and and stuff.

$2500 45 mins after picking up a car that was already here. Clutch died when i went to fill up with petrol. Hadnt even tried launching it. I think the previous owner did some huge launches while the bank cheque was clearing.

Fast forward 3 months and I find out that i have very little compression in the 6th cylinder (about 1/3 of what the others were reading). I am spending 10k for the bottom end rebuild and strengthening.

My car has been off the road since the begining of Jan. Its been out of action longer than its been on the roads. All this because the previous owner was a tight ass and did an el cheapo patch job. He also lied about parts that were on the car.

So, be prepared for worst case scenario. Not all GTR's have problems. Some are in pretty good condition. When you import, its pretty much luck of the draw. I got mine RACV checked (which is a load of crap in my opinion) to find out any and all issues. If you buy one from here (Australia) then you will be paying more but at least you could take it to your mechanic (which is the best way) to get it fully checked out. Compression tests are your friend!

Remember, you dont have to buy 89 models. There are a few later models R32 GTRs for sale for aorund the same price. Just be patient.

Day I picked mine up (92 model, got it back in 2003) it blew one of the turbos... put HKS 2530's on as they wernt much more than rebuilt highflows at the time. Had it 2 days and the gearbox went bang and one of the valve guides had snapped scoring a piston and bore so it needed a rebuild.

Spent ridiculous amounts of money on the car bringing it up to standard since.

They do require some money and alot of care to keep them in good condition, but are absolutely awesome cars.

so what should i do? if i do decide to import one, which is a prefered way for me, should i take it to a mechanic right away and get it all checked out? like compression test, maybe take the head off and have a good look, check turbos? would that keep me on a safer side?

man, it is very tempting to get a GTR, but so far only people with more or less painful experiences have replied, so that is putting me down just a bit! :looney:

IMHO you are better off paying a little more for a better car than buying the cheapest R32 you can find. Don't get fixated on a $20 grand mark. $20 grand GT-R's do exist, but by and large they are not pretty. Budget about $25k for a goodun & look after it. Take time finding it & make sure you get it looked at by someone who understands them.

By the way - parts and gear are not necessarily that expensive. Costs rise because people mostly want all the good gear going in when they rebuilt engines etc. You don't for the sake of the argument have to put forged pistons in a rebuilt RB26.

Also, running costs are alot more than for an ordinary car. 98 octane will be about 10% more expensive per litre, you will use much more of it, tyres are more expensive, synthetic lubricants more expensive, as is insurance etc etc etc.

Having said that - a GT-R is probably going to be the best car you will ever own. Certainly mine is. I have had it two years now & no engine rebuilds, no gearbox replacements, just the normal servicing requirements. The only money spent on upgrades/replacements is because I wanted it to go harder.

so what should i do? if i do decide to import one, which is a prefered way for me, should i take it to a mechanic right away and get it all checked out? like compression test, maybe take the head off and have a good look, check turbos? would that keep me on a safer side?

man, it is very tempting to get a GTR, but so far only people with more or less painful experiences have replied, so that is putting me down just a bit! :looney:

Unless you can get one in under RAWS/SEVS you are basically too late to import one. The 15 year rule is gone.

A compression test is not a bad idea.

Don't take the head off it - you don't need to.

Stock turbos are cheap (a few hundred dollars each) so you are better to concentrate on the engine than the turbos.

Not sure why people with good experiences keep quiet about it - but there are plenty out there.

Also, be aware that has been in Oz for a reasonable length of time is likely to have had things fixed. Buying a car like this means you don't have to fix everything yourself - stuff is already done.

so what should i do? if i do decide to import one, which is a prefered way for me, should i take it to a mechanic right away and get it all checked out? like compression test, maybe take the head off and have a good look, check turbos? would that keep me on a safer side?

man, it is very tempting to get a GTR, but so far only people with more or less painful experiences have replied, so that is putting me down just a bit! :looney:

Once you have imported it, you own it, good or bad.

If your at all concerned about that then suggest you only buy one already here and get it checked by a competent w/shop who are familiar with them.

We are based in WA and see GTR's all the time here and there are still some good ones come in. Not many, but a few. Our price for a full inspection including cylinder leakage and compression test is $180.

BTW, the 89 import rule is closed now and all future ones will have to be near stock plus compliancing will be more expensive.

Makes the ones already here a lot more attractive now.

Cheers

Ken

i agree with djr81....however with mine, I was told that engine was rebuilt, gearbox rebuilt, and had a new clutch. As it turns out, clutch was reco'd, engine wasnt rebuilt but more patched up...which made the problem worse, and so far so good with the gearbox. If they say its been fixed, its not such a bad idea to check where and when it got fixed, then you could simply call the place up and enquire about it. This however is not really neccessary. Its just an extra precaution. You dont need to pull the head off to check what the deal is within the block. Compression and leak down tests are the best ways of finding out if the motor has any issues. Like djr81 said, its better to take the car to a place that knows GTRs than just your average mechanic.

Yeah, plenty of 89 GTRs already in the country, with punks trying to profiteer off them!  Try the private sale, but insist on a compression test etc.  It's like importing but without the waiting!

Not everyone trying to sell a car is trying to profiteer...

There are some, but you only have to ask a couple of straight forward questions to figure it out.

On the other hand there are also alot of people trying to talk down the prices & the desirability of the GT-R's. Their motives are less straightforward...

Buying a Skyline is not inherently different from buying any other car. You need to know what you are looking at and be realistic with your expectations.

Not everyone trying to sell a car is trying to profiteer...

There are some, but you only have to ask a couple of straight forward questions to figure it out.

On the other hand there are also alot of people trying to talk down the prices & the desirability of the GT-R's.  Their motives are less straightforward...

Buying a Skyline is not inherently different from buying any other car.  You need to know what you are looking at and be realistic with your expectations.

Perhaps not all are trying to profiteer. But there's far too many 89 GTRs that are *just registered*. Connect the dots. If they bought for themselves they wouldn't be trying to sell 2 weeks after it clears the compliance workshop.

Perhaps not all are trying to profiteer.  But there's far too many 89 GTRs that are *just registered*.  Connect the dots.  If they bought for themselves they wouldn't be trying to sell 2 weeks after it clears the compliance workshop.

I agree. Good questions to ask are:

Why did you buy it?

How long have you had it?

Why are you selling it?

If you elicit honest answers then you are probably half way there.

Here's the typical ad I'm talking about (although not a GTR):

Just landed - this r32 GTST skyline has seeminly high klms ( 210K klms showing) but was converted from non turbo to turbo so it is likely that the engine and gearbox have not travelled this distance. car has minor dents and scratches but this is a bargain opportunity to get into such a car for such a cheap price. also has 2 deck CD system and sports exhaust. compliance and RWC not included. no offers.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
    • There is a really fun solution to this problem, buy a Haltech (or ECU of your choice) and put the MAF in the bin.  I'm assuming your going to want more power in future, so you'll need to get the ECU at some stage. I'd put the new MAF money towards the new ECU. 
×
×
  • Create New...