Jump to content
SAU Community

Recommended Posts

its amusing to see how scared Skyline owners are of fitting decent rims..... the ns boys cant get enough.

Yeh i hear ya Trent, wheels need to be sticking out to Fcuk well camber and even spacers, Pitty i just bought wheels, Oh well..... Good luck with the sale! :uh-huh:

different width front and rear on a gtr affects the attessea - spelling. if only they would fit on a gtst without much lipping/roling or guards.

different  width front and rear on a gtr affects the attessea - spelling. if only they would fit on a gtst without much lipping/roling or guards.

Actually - the above is wrong.

ATTESSA takes input from front and rear wheel speed. This in turn relates to rolling diameter. It is therefore possible to use these rims by having different profile tires to ensure equal rolling diameter front and rear.

Personally I prefer to have the same width of rim and tyre to achieve this, but each to their own I suppose.

I do believe the width isn't such a problem, Its when you stagger 17" on front and 18" on da rear then the profile of tyre on top, and i'm pretty sure its all about the diffs being level. So therefore its all about the circunfrence of each wheel(tyre included) If they are the same then SHE no worry, In my eyes width is all good to be different, alsong as you account for the tyre profile.

would probably best consider widebody on a gts-t.

12's with 13mm offset will stick out rear guards on 32gts-t by a good 6cm or so. should be ok clearing coilovers though.

check out http://toy4two.home.mindspring.com/offset.html for wheel-offset calculator to compare your current rims with these

man, these rims are pimp! suprised they haven't been sold yet

good luck with the sale trent,

(lol @ skyline owners are scared of decent rims!)

-tim

who cares? ;)

DUDE you should care! being the face of AUTOBARN!!! If no one on here wants your wheels, maybe they are just not as HARDCORE :freak: as you, which reminds me havent seen you slide for a while...........(what happend?)

i dont see what the differnce is if you have 265/35/18 on the front and 285/35/18 on the rear they are still the same profile hight 35 so same rolling diamater, correct me anyone if im wrong.

the profile is not an exact sidewall height, as tyres get wider in same profile the sidewall gets higher also iirc (its one way or the other), even though would make an unnoticable difference to the speedo the attessa still picks it up.

Thats my understanding of it anyway

Jamie

i dont see what the differnce is if you have 265/35/18 on the front and 285/35/18 on the rear they are still the same profile hight 35 so same rolling diamater, correct me anyone if im wrong.

The profile is shown as a percentage of the width.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...