Jump to content
SAU Community

Recommended Posts

In regards to recording it.. not too sure about that - make sure you tell them you are doing it first.. or they tend to get nasty..

As for videoing it.. well you could.. not to sure though.. someone should get it checked out.

Mates got in trouble for locking their phone - cop was abusing them "are you recording this.. you better not be recording this" all he did was lock his phone and the light goes on.. silly silly..

I also believe the best you could do would be to record it.. most won't let you video it. always ask for their details 2..

you are allowed to record anything you want, wait for them to start abusing you, then say "oh, did i mension you are being recorded" then, if they abuse you some more, send the tape to their bosses.

everyone beleives the cop and not the hoon, but if you have at least audio evidence, youll be ok.

steve

Guys.. guess what.. I called the police complaint centre today trying to file a complain against the officer who verbally abuse me when i was pulled over as mentioned above. I am so SURPISE. "In the court of Australia, the word "F*CK" is actually deem not to be offensive." So there is nothing wrong with the police officer who actually said it. Therefore, they can't file the complaint. LOL...... So next time when the police officer pull me over...

"Good morning fu*king officer, why the f*ck you pull me over, wat the f*ck did i do?"

Unbelievable and disppointed. :s

They're friggen cops. They deserve that name. I got done by a parking inspector today for parking in my own bloody driveway.....anyways to the matter at hand:

1: A police may record any conversation he is a party to.

2: A civilian may record any conversation they are a party to.

3: You do not have to answer an police questioning, besides your name, details etc.

4: Police cannot search your car unless they are searching for a weapon or radar detector, or have reason to believe that you have a radar detector or weapon.

They can use abusive language, that is legal, but cannot assault you (create an imminent sense of danger or harm.) Its handy (particulalry) for us Skyline drivers to carry some sort of recording device, for future reference :P.

Guys remember, that when you get pulled over, it is essential that you remain calm and polite at all times. Make sure you answer as little as possible, query the police officer of his judgement, for example, in this case where he said the car was too low, you should have asked him to measure it accurately as the law permits 10cm clearance and so on. Keep a cool head, think smart and the cop will leave you alone.

In terms of speeding and other infringements etc, the cop will first try and gain an admission. "Why were you speeding?" Any sort of answer to that question proves your guilt. The best answer being "I wasn't" or NO REPLY.

If you have a moody, abusive cop, first respond politely. If he still continues, that's when you rip out the attitude. So long as you can back yourself up, you're set.

Damn I love the Criminal Procedure unit @ Uni.

After exams I think I might write up exact details and laws people can refer to in relation to Police Powers in Victoria and post them on this forum......just because most cops are drainers and I hate them. I'd love to see the look on a cops face when you give them the name of the act, section and sub-section that governs the exact act that they are engaging in! :P

Guys remember, that when you get pulled over, it is essential that you remain calm and polite at all times. Make sure you answer as little as possible, query the police officer of his judgement, for example, in this case where he said the car was too low, you should have asked him to measure it accurately as the law permits 10cm clearance and so on. Keep a cool head, think smart and the cop will leave you alone.

In terms of speeding and other infringements etc, the cop will first try and gain an admission. "Why were you speeding?" Any sort of answer to that question proves your guilt. The best answer being "I wasn't" or NO REPLY.

If you have a moody, abusive cop, first respond politely. If he still continues, that's when you rip out the attitude. So long as you can back yourself up, you're set.

A mate of mine was pulled over in his trueno (wasn't speeding), and when the cop came to the window he said he was "exceeding the speed limit by 17kmh". Considering he wasn't speeding, my mate then says "Can I see your readout then???" Without answering the question, said cop says to pop the hood.

You still have to be careful in the way you talk to them regardless, because the police trump card is their ability to search cars for defects (and they will find something), meaning if they really want to f*ck you over they will f*ck you over. Remember that's not offensive in the courts of Australia. :P

But back to the topic at hand he shouldn't have been able to speak to you like that, but just get a voice recorder & keep it in your glovebox for if there is a next time. :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...