Jump to content
SAU Community

Recommended Posts

sav man:with the wire cut what does the hicas do?dosnt work altogether or light in dash flashes or what?

The wire is for the speed sensor, so things that rely on speed to activate -- i.e. HICAS -- get confused, which is why cutting the wire = bad.

PSI_GTSII: Your car is obviously fux0red. Give it to me to keep. :cheers:

Lucien.

The wire is for the speed sensor, so things that rely on speed to activate -- i.e. HICAS -- get confused, which is why cutting the wire = bad

So if I fitted Power FC what would then happen to this wire.....as I thought the PFC replaced the factory ECU...?

And no Lucien you cannot look after my car :);)

The PFC completely replaces the ECU and doesn't have a speed cut: you leave the wire attached.

Sorry I'm confused ;)

Attached to what...?

So you cannot cut the speed limit wire as it makes the HICAS etc go crazy, but if you pull the original ECU out of the car to replace it with PFC, what then is this wire connected to..?

And if nothing, how is that different from just cutting it..?

I will grasp the concept soon I promise :)

Urgh.

The wire is part of the loom that plugs in to the ECU. When you cut the wire, the ECU no longer recieves a speed reading (which is why it doesn't pull fuel) and therefore can't properly activate/deactivate speed sensitive devices, like HICAS.

When you completely replace the ECU with a PFC, the PFC plugs in to the same loom and recieves the speed signal (assuming you haven't cut the wire). However, the PFC is not programmed to pull fuel when the sensor reports 180+KM/H.

Lucien.

Guest Mashrock
All jap cars are limited at around 180 kmh ( usualy 185 or so ) .

Bog stock gtrs will hit the speed cutout very easy and depending on model ( if you dont have the limiter ) will go on up to 250 kmh ( r34 gtr ) .

I took my stock 34 to the drag strip ( only mod , catback exhaust ) and i hit the cutout in 4th just after the 400 mt finish line .

i get up to around 220 (i have a 180 speedo) and still have 2 gears left :cheers:

done on a private road also. :)

the speedo is way out at that sort of speed, when i hit the cutout if there was still markings on the speedo it would have shown about 200 so around 15km/h too much. (in r33 gtst)

i had to get my speedo fixed coz of the 18's. speedo was showing 15k/h over b4 i got it fixed

Don't know why people are having problems with people saying speed cut wasn't till 200.

My supra and skyline have both speed cut pretty much spot on 200. I can tell this by looking at the speedo and its a damn site closer to where the 200 would be written than the 180 mark.

Maybe they were wrong, but I promise both cars were bloody close to 200km when they hit it.

Don't know why people are having problems with people saying speed cut wasn't till 200.

My supra and skyline have both speed cut pretty much spot on 200. I can tell this by looking at the speedo and its a damn site closer to where the 200 would be written than the 180 mark.

Maybe they were wrong, but I promise both cars were bloody close to 200km when they hit it.

its the speedos, the speed cut as wrxhoon says is in the 180's the speedo is incorrect at those speeds.

u can see how fast u really go by working it out on the rpm u are doing when u hit the cut.

If you dont want or need to spend the money to get a PFC, there are plenty of cheaper options to get rid of the speed limiter. Most aftermarket rev/speed meters will override the speed cut. Ive got an old Ultra brand speed meter that does 0-400m ET and top speed and has a trip computer sort of thing, and it cuts it out. Im sure you'd be able to pick up a second hand one for less than $100.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...