Jump to content
SAU Community

32 gts4 Unknown Problem - any ideas ?

Snotballs
 Share

Recommended Posts

Snotballs Contributor

Snotballs

Posted
Posted

I have 32 gts4 and was driving last week and everything was cool. Pulled up at lights then went to drive off and when i got to about 2500rpm it was like the car died, foot on accel, but no response.. car was kinda hopin. Pulled over on side of rd and car was idling from 1000 to 2000 up and down without me doing anything. Anyone have idea what might be causing this? Also the other night it happened when i was driving, and eveytime i got to 2500rpm it would kinda choke, so had to drive home like 45kms hr. Id just like to have an idea what might be casuing this before i go to mechanic, cz dun wanna get screwed over.

I was thinking maybe afm might be stuffed. But this comes and goes, its not constantly happening. So if this has happened or someone has idea, please let me know :D

snotballs

Link to comment
Share on other sites
flagger Collaborator

flagger

Posted
Posted

afm is a good bet, when its unplugged, max rpm is 2500. check the element and plugs. if it looks ok and you have cleaned it up, it could be the circuit board inside. usesearch and you shall find answers :)

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Sleepergm
      Rear suspension upgrades

      By Sleepergm · Posted

      I think last I checked it was 35cm from fender to wheel center. I heard u can go up to 45-48cm before handling his impacted. But I need to check again. I know I was about 1.2 cm off being close to max recommended. 
    • Murray_Calavera
      Misfire/stalling issues

      By Murray_Calavera · Posted

      You'd need to weld on an external gate to achieve that number though. I can't remember seeing anyone make 500hp at the wheels with the stock manifold / internally gated turbo.
    • TmZer0
      Pillowball/Hardened Runner Hybrid Approach

      By TmZer0 · Posted

      Suspension Component Question Looking for some feedback based on people's experiences! I know this has been loosely covered in other threads but I can't find any direct answers/experience. I'm up for some bush/rod replacements and was interested in a hybrid approach between hardened rubber and pillowball kit. Why not choose one or the other? Well, this is for my daily driver, which I track once or twice a year. I like a stiff car and a sporty feel but I don't want to compromise the chassis too much with 100% pillowball gadgetry.  I know from experience and a tonne of reading that not all components affect ride quality in the same way - eg. in my case, coilover top mounts should be hardened rubber as pillowball transfers way too many undesirable qualities and doesn't have much more upside than a good hardened rubber. But, pillowball tension rods translate to much better turn-in/steering response and make the car significantly sharper, without negatively impacting ride quality in a significant way.  I'm not TOO bothered by NVH (to a degree). So, with context out of the way, does anyone have any experience with a hybrid approach as mentioned above? I'm going to replace all components over time so am seeking guidance on: - front tension rods - upper camber arms - rear lower control arm - rear traction rod - rear upper camber arm - rear toe adjuster rod  Secondly, is there any reason why this is a bad idea? Or any other info/wisdom that I might not be considering. Cheers 🫶
    • Chris_Guthrie
      Misfire/stalling issues

      By Chris_Guthrie · Posted

      That's good to hear I'll stick with the stock I hear they are good for 500hp and I'm only shooting for 350-400 once I can get this thing sorted and get to actually building it. 
    • Dose Pipe Sutututu
      Misfire/stalling issues

      By Dose Pipe Sutututu · Posted

      The stock one will outperform any aftermarket standard position exhaust manifold. If you don't believe me, do a back to back test (same turbo, same boost, same timing) and you'll be super surprised.
×
×
  • Create New...