Jump to content
SAU Community

Recommended Posts

I'm just about to have a Blitz SBC i-D III put into my car and am wondering what sort of boost i'll be able to run without killing the engine or sending the ECU into panic mode.

My car is a 99 R34 GT-t

FMIC

3" turbo back exhaust, 3" high flow cat

K&N panel filter

The rest of the car is absolutely stockers.

Would I be able to run 9-10 PSI without needing new fuel pump, etc ??

Would it be alright to have 12 PSI as the high setting to be used every now and then ?

Link to comment
https://www.sau.com.au/forums/topic/76602-r34-question/
Share on other sites

You have to change a bunch of stuff to fit that turbo. Manifold, dump, etc.

Fuel pump needs to be changed definitely with turbo change but possibly before then depending on what you are doing. You wouldn't want to push anymore than about 190-200rwkw without changing the fuel pump.

Shonen is going for the biggest turbo known to man. It will be henceforth known as the Shonen Potato.

Which TD-05 is it? 8cm or 10cm wheel?

Link to comment
https://www.sau.com.au/forums/topic/76602-r34-question/#findComment-1409305
Share on other sites

I'm pretty sure its the 8cm, but it is possible i could be wrong. I'm not sure on how all the numbers and shit that go with the turbo works, but would hte TD05 be considered a laggy turbo on a NEO engine ?? I'm not chasing big power in my car so i'm looking for a turbo that spools around 3000rpm and doesn't really run out of puff til somewhere after 6500rpm i guess.

Link to comment
https://www.sau.com.au/forums/topic/76602-r34-question/#findComment-1409416
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...