Jump to content
SAU Community

This is one of the coolest things I've seen for a long time :)

Merli

By Merli,
in General Automotive Discussion

 Share

Recommended Posts

Merli Grand Master

Merli

Posted
Posted

This was taken from a newsgroup, and then posted onto an eGroup I am on... I don't claim any of the following as my own work.

How a F1 Motor Can Make Music

http://www.ausdaoc.net/Chauffe2.mp3

First you'll hear a 10-cylinder, 750 horsepower Asiatech F1 engine

being warmed up. Then it performs a rousing version of "When The Saints Come Marching In", to the delight of assembled pit staff and journalists.

Here's how the magic was achieved (technical/musical details via F1 Racing magazine): As we all know, a V10 engine produces five combustions per revolution at a frequency per second of 60/(5 x revs per minute), which equals 12/rpm. Therefore, to work out the revs you need to hit a particular musical note, you multiply the note's frequency by 12. To play a 440Hz 'A', for example, you need 5,280rpm. For 'C', use 3,139rpm, for 'F' 4,191rpm, and so on.

Asiatech's French technicians (the engine, despite its name, is derived from a Peugeot design) simply programmed their engine to run through the various rev/note ranges in the correct sequence. The result is delightful.

And think of the possibilities - BMW's F1 engine, which howls all the way to 19,050rpm, could rip through the entire Hendrix songbook.

Even better: imagine a massed NASCAR choir performing "The Star Spangled Banner"! Being eight-cylinder engines, the frequency per second would be 60/(4 x revs), which means you'd multiply the note frequencies by 15 instead of 12: 'A' would arrive at 6,600rpm, 'C' at 3,923rpm, 'F' at 5,238rpm, etc.

Mark my words, someone will be getting rich at Daytona next year

selling a CD of NASCAR patriotic anthems. Send some of the royalties my way.

It's pretty cool-sounding, really, and it says a LOT about exactly how much control the pit guys really have over the cars and engines these days. Give it a listen. I don't know if they take requests, but Jordan/Honda and BAR/Honda could probably do "Purple Haze" in honor of their ever-grenading motors!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      RB20DE NEO smallbox clutch.

      By Duncan · Posted

      yeah first and reverse is where you will find clutch release issues (whether hydraulic or mechanical) because the difference in revs required is the highest there; particularly changing down from 2nd to 1st when still moving. To be clearer though, it is possible that the clutch release bearing is the wrong height. This is less likely than a hydraulic issue but it is not unheard of when you are mixing and matching
    • Duncan
      NC MX5

      By Duncan · Posted

      Quite right, if you make it to that pension you deserve every cent
    • jtha7
      Replacing turbo water line - any recommendations or advice?

      By jtha7 · Posted

      Hi all, Restoring r33 series 1 rb25det. All the heater hoses were on their way out, have replaced them and put it all back together. After testing I noticed a small leak from behind the head on the actual metal water line to the turbo when cars warm. I tried running a longer hose over it but it kept leaking...   I am about to take the (stock) manifold off again😔 to change the water line does any one have any lines they recommend? I was looking at Aeroflow Turbo Oil & Water Line Set but not sure what everyone else recommends. Car is completely stock but want to upgrade turbo eventually. it looks like ill have to disconnect a lot just to replace these lines so if there's anything else recommended to do please let me know. Thank you in advance!
    • MBS206
      RB20DE NEO smallbox clutch.

      By MBS206 · Posted

      From memory, on the R33 GTSt at least, while everyone says "It's not adjustable", I found when I changed clutches in mine, it just needed a small adjustment on the rod length. But be very wary here, as you could end up trying to push the pushrod in the master too far, or blowing out the slave.   Most likely though, if the master/slave isn't bypassing internally or leaking out, then the throw out is the wrong height compared to the fingers on the clutch, so when it moves to disengage the clutch, it isn't 100% disengaged. You can check part of this out too by jacking the car up, having the engine running, put your foot on the clutch and try to engage 1st gear. If it goes in pretty easy (Compared to the ground) and/or the wheels start turning a fair bit and it takes a bit too much brake pedal to bring them back to a stop, this is likely the issue.  I'm not sure if you can adjust the height of the forks etc in these though, it's been that long since I've touched any RB gearbox.
    • MBS206
      Lock up the old for sale / wtb threads.

      By MBS206 · Posted

      That's all good, I thought I was missing some interesting feature! Maybe @PranK can double check if that is something that is meant to be operating or not.
×
×
  • Create New...