Jump to content
SAU Community

Recommended Posts

Just Jap is pleased to offer these excellent prices on our new type 1 and type 2 intercoolers for SAU forum members.

We have both the Type 1 and Type 2 kits in stock, so unlike other offers floating around the net there is:

1. No waiting - we have these in stock at our Kirrawee factory ready to go

2. No deposit required

3. No minimum order

4. No surprises

The type 1 kit is available to all SAU forum members for only $550

The type 2 kit is available to all SAU forum members for only $600

Both kits are complete kits and include bar and plate intercooler, piping to suit your vehicle, clamps and hoses.

* The Type 1 Kit will suit R33 GTS-T only

* The Type 2 Kit will suit both R32 & R33 GTS-T

Picture of the Type 1 Kit for Skyline R33 GTS-T (Size: 600 x 300 x 76) - Chrome Piping

t1chcoolerkitr33gtst.jpg

Picture of the Type 2 Kit for Skyline R33 GTS-T (Size: 600 x 300 x 76) - Polished piping

t2coolerkit33gtst.jpg

Picture of the Type 2 Kit for Skyline R32 GTS-T (Size: 600 x 300 x 76) - Polished piping

t2coolerkitr32gtst.jpg

How can you get your hands on one of these kits?

The answer is simple - email us at [email protected], please note that you must mention that you are an SAU forum member to take advantage of this offer - Alternatively, simply drop past our shop in Kirrawee and check them out for yourself

The kit prices shown above do not include delivery however we will ship anywhere in Australia for $30.00

Check out our huge range of new and used performance parts and import vehicles via our website at www.justjap.com

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

is this a bar and plate or tube and fin? sorry i cant tell the difference by jus looking lol.. and how do these compare to say the GENUINE hybrids?. do instructions for a DIY install come with it?. and can i just goto your store to purchase one instead? would rather use card thats all..

is this a bar and plate or tube and fin? sorry i cant tell the difference by jus looking lol.. and how do these compare to say the GENUINE hybrids?. do instructions for a DIY install come with it?. and can i just goto your store to purchase one instead? would rather use card thats all..

Hi,

We have these in stock so you are welcome to drop into our shop and pay by credit card.

They are a bar and plate cooler

Performance wise these will be the same as the "genuine" Hybrid cooler, which in itself is just a basic intercooler with a "Hybrid" plate attached to the top of it

The kits do not include instructions, they are fairly straight forward when it comes to fitting

do you sell hybid type hose clamps?

depends on the id size let me know and i will check for you

  • 3 weeks later...
  • 2 weeks later...

Plenty of stock still available

J_R32 yes please email us and we will work something out for you

sorry for straying a bit off here. Just thought i'd add that noone needs to worry bout service or anything. Currently buying/getting work done to an R31 there, more than happy with it all. Great service, great prices, great quality. Also seen these coolers myself, rather nice units if i must say.

For what sort of applications would these be best suited for(rough estimate?)? e.g power range?

Just Jap, i have a 94 r33 gtst s1! what sort of power figure would i expect to get if i installed one! what sort of power are they rated for! and could you PM the specs ect.

as i am very interested in purchasing one.

cheers

Guest
This topic is now closed to further replies.



  • Latest Posts

    • Was that with the cas upside or correct way up?
    • Did and sync timing with light 
    • Have you done the Ignition Sync Wizard in the AEM software?
    • Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
×
×
  • Create New...