Jump to content
SAU Community

Recommended Posts

Just Jap is pleased to offer these excellent prices on our new type 1 and type 2 intercoolers for SAU forum members.

We have both the Type 1 and Type 2 kits in stock, so unlike other offers floating around the net there is:

1. No waiting - we have these in stock at our Kirrawee factory ready to go

2. No deposit required

3. No minimum order

4. No surprises

The type 1 kit is available to all SAU forum members for only $550

The type 2 kit is available to all SAU forum members for only $600

Both kits are complete kits and include bar and plate intercooler, piping to suit your vehicle, clamps and hoses.

* The Type 1 Kit will suit R33 GTS-T only

* The Type 2 Kit will suit both R32 & R33 GTS-T

Picture of the Type 1 Kit for Skyline R33 GTS-T (Size: 600 x 300 x 76) - Chrome Piping

t1chcoolerkitr33gtst.jpg

Picture of the Type 2 Kit for Skyline R33 GTS-T (Size: 600 x 300 x 76) - Polished piping

t2coolerkit33gtst.jpg

Picture of the Type 2 Kit for Skyline R32 GTS-T (Size: 600 x 300 x 76) - Polished piping

t2coolerkitr32gtst.jpg

How can you get your hands on one of these kits?

The answer is simple - email us at [email protected], please note that you must mention that you are an SAU forum member to take advantage of this offer - Alternatively, simply drop past our shop in Kirrawee and check them out for yourself

The kit prices shown above do not include delivery however we will ship anywhere in Australia for $30.00

Check out our huge range of new and used performance parts and import vehicles via our website at www.justjap.com

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

is this a bar and plate or tube and fin? sorry i cant tell the difference by jus looking lol.. and how do these compare to say the GENUINE hybrids?. do instructions for a DIY install come with it?. and can i just goto your store to purchase one instead? would rather use card thats all..

is this a bar and plate or tube and fin? sorry i cant tell the difference by jus looking lol.. and how do these compare to say the GENUINE hybrids?. do instructions for a DIY install come with it?. and can i just goto your store to purchase one instead? would rather use card thats all..

Hi,

We have these in stock so you are welcome to drop into our shop and pay by credit card.

They are a bar and plate cooler

Performance wise these will be the same as the "genuine" Hybrid cooler, which in itself is just a basic intercooler with a "Hybrid" plate attached to the top of it

The kits do not include instructions, they are fairly straight forward when it comes to fitting

do you sell hybid type hose clamps?

depends on the id size let me know and i will check for you

  • 3 weeks later...
  • 2 weeks later...

Plenty of stock still available

J_R32 yes please email us and we will work something out for you

sorry for straying a bit off here. Just thought i'd add that noone needs to worry bout service or anything. Currently buying/getting work done to an R31 there, more than happy with it all. Great service, great prices, great quality. Also seen these coolers myself, rather nice units if i must say.

For what sort of applications would these be best suited for(rough estimate?)? e.g power range?

Just Jap, i have a 94 r33 gtst s1! what sort of power figure would i expect to get if i installed one! what sort of power are they rated for! and could you PM the specs ect.

as i am very interested in purchasing one.

cheers

Guest
This topic is now closed to further replies.



  • Latest Posts

    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
    • ECUtalk pages don't mention they support the ABS computer (consult port has more than one CAN), so you might just need a different scan tool. But, I would expect ABS is a different light to the brake warning/handbrake light, do you see an ABS light come on for a few seconds when you turn the key from ACC to IGN? But since you said: I'd have a look at the ABS sensors in the rear hubs to make sure they are not damaged, disconnected etc.
    • OK, if it idles at 1000+ with the AAC, its not an idle airflow problem. The cold start valve just gives extra air when the engine is cold, but you have enough air without it to idle at 1000. I think you are back to a fuel problem, sorry. Can you see the fuel pressure staying constant or does it drop as the revs drop to a stall?  
×
×
  • Create New...