Jump to content
SAU Community

Get rid of that weak little horn in your R33


cheek
 Share

Recommended Posts

Like the other imports I have owned, I hated the polite little JDM horn of my SII R33, so I did what everyone should do...replace it (or them)

For $5 from Pick-a Part, and about 5 minutes fitting time, I now have the meanest, baddest barking monster horn, short of going the airhorn route.

Here's how...

1. Go to a wrecker like pick-a-part

2. Locate the Ford section

3. Find a Falcon of the XD-XF vintage, an old 1980s tank. (Later models need a separate earth wire)

4. Remove both horns and their mounting brackets (they are located underneath the washer bottle in the front left corner of the engine bay)

5. Unplug and remove your Skyline's weak little nancy-horns

6. Using the bolts from the stock horn, bolt these into the stock location in your Skyline, and plug them in with the standard wiring plug. They earth through the bracket, so make sure they are bolted in tightly

7. Toot the crap out of anything that moves. This thing will be LOUD

Link to comment
Share on other sites

  • 1 month later...

When I installed my FMIC The horns had to be moved so I bolted them to the top of the cooler. Only problem was that the bolt was too long and so the horns, while secure, were very loose in their mounting.

End result; when you beep the horn not only do you get the normal beeping but the horns themselves vibrate like mofos and make a massive racket. Scares the crap out of people.

Link to comment
Share on other sites

  • 8 months later...

maybe all you guys have a grounding problem or something?

I have the stock horn, and let me tell ya, it's fricken loud. I use it all the time, and it's still running strong.

It's louder than any other car i've driven, and beleive me, i love testing the horns.

Link to comment
Share on other sites

  • 7 years later...

I got rid of mine from my R32 GTR (they wouldn't scare a fairy) and replaced them with holden astra dual horns.

Now so loud farkin!!!

Link to comment
Share on other sites

^ thanks for tip Damo^ Do they Plug straight up ??

Nah man, the stock ones have the power wire and earth through the bracket (IIRC).

The Astra ones have a different plug, and have a power and earth line, so make sure when you get them from a wrecker, ask for the plugs as well.

What I did was make up a bracket to hold the horns (obviously), cut the old plugs off (one wire), soldered the power wire to the appropriate line on the astra plugs, then extended the earth lines on the astra plugs and earthed them using a ring terminal where I bolted the new horn bracket on.

Pretty simple, didnt even have to change a fuse or anything.

Works a treat.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



×
×
  • Create New...