Jump to content
SAU Community

Recommended Posts

Joel,

I'd rather have something that's quick 0-100km/h..... 100-200km/h.....& 200km/h-0 :P No good being quick to 100 but nothing left after that.

I had an interesting dream the other night...... I was side by side with a 280+rwkw Commodore doing 80-90, we both accelerated & I didn't see tail lights x2.

With very grippy tyres (i.e. RE540's - D01J's) 250+rwkw can be used to full effect on the street (once heated) although very grippy tyres can be a tad costly for daily use.

Back to the topic......

A STOCK GTS25t using ELF Turbomax (+ advanced timing) & running slicks would NOT get into the low 13's. Of course it depends on your definition of stock? I take stock as meaning factory standard, no modified parts AT ALL apart from the slicks. You can advance the timing as your not replacing anything but that's about it. High 13’s but not low!

  • Replies 94
  • Created
  • Last Reply

Top Posters In This Topic

Matt - That Commodore, Have you heard Jaffa is having some work done to the VX?

280rwkw would be needed to sit level with the 33. :P

----------

All depends on the Budget. :)

0-100 or should I say 0-160 is fairly decent with a 200rwkw R32.

That will do me. :D

Originally posted by kabab

As sub zero have claimed they ran a 12.8 with slicks advanced timing elf and exhuast.

So your telling me an exhaust will give you 1 full second in the 1/4 ??

If an exhaust system is restrictive enough a 1 second improvement is very possible. Ask any of the SA guys @ a recent Tilbrook dyno day. SPOOLIN's modified GTS25t made 219rwkw & then after replacement of the *very* restrictive cat & cat back section followed up with 282rwkw. A gain of 63rwkw is more than enough to reduce a 1/4 time by a full second.

Bottom line is...... until someone goes out & runs 13.3 or less (what I consider low 13's) in a factory standard GTS25t using only slicks, high octane fuel & advanced timing then I'm not convinced.

Maybe my last comment will gee someone up to prove me wrong :D If so good on 'em.

Originally posted by -Joel-

I can't believe a 12.8 from ~120rwkw in a 1400kg car.

Then again that bloke with the LJ type torana was making around 120rwkw and that weighs in at 1300kg's, He ran some where in the 12's with a really hard launch.

Joel,

The LJ only ran that quick as it was geared (diff & box) for 0-400m only! It was/is flat out doing much over 185km/h. Your car would manage a 12.8 if you set the gearing up to suit 0-400m, in fact seeing as you like 0-160km/h & off the lights stuff why don't you? :D

Yeah I knew Jaffa was having H/C done a while back. Jaffa's LS1 suffered from the dreaded oil consumption :D So why not go for it in the rebuild. The 280+rwkw Commodore I dreamt about has H/C too (+ a 300kw eng to start with) I also dreamt about another successful 80km/h run vs. a 240+rwkw Commie Ute.

260rwkw 1500kg (car with driver)

300rwkw 1700kg (ditto)

I would've thought the above would be closely matched. I could be way off though?

I remember reading somewhere a kg removed is worth more than a hp gained.

Originally posted by whatsisname

Bottom line is...... until someone goes out & runs 13.3 or less (what I consider low 13's) in a factory standard GTS25t using only slicks, high octane fuel & advanced timing then I'm not convinced.  

Maybe my last comment will gee someone up to prove me wrong :D  If so good on 'em.

I sure hope so to ken doll :D i to belive 13.3 or less is a low 13, subzero have there is hope..

Originally posted by -Joel-

ermmmmm H/C?

ahh Also Remember I do like those Rolling runs Matt. :)

LOL.. Do you tell your Wife about these dreams?

Or does she wake you up and tell you to stop throwing your legs and arms around from changing gears? :D

H/C = Heads & Cam package

:lol: She hears all about the dreams I have (not that she's all that interested) Naa she doesn't cop any stray feet or hands, the roll cage & harnesses keep the limbs on my side of the bed :D

:lol: They must've got their wires crossed dude. It should've been, "Fabio..... the most beautiful man in the world" :)

Who do you know in the RAAF that knows me?

Yer but look at the tyres. And ask what RPM he launched at.

I run those cheapo Simex tyres and they grip so damn wheel where I find it really hard to spin second up out of a corner and first gear doesn't spin on launches.

Bridgestone B530's, older style Donuts, Baraum & Goodyear F1's all would do the above & all with the same width 225 50' 16.

Ahh Rob (or Roo) I should've guessed! His RX7 is getting some serious HP these days! (big turbo & all) Xtra grunt so he can get himself in trouble with the law "again" :P

REV's 13.4 is an awesome time! I know REV had his new S-AFC II fitted, be interesting to know if he'd tweaked the mixtures @ all?

Goes to show just how tough it would be to crack a low 13 with nothing more than slicks, high octane juice & a bit of timing advance. The biggest restriction would be the factory exhaust system. I still think low 13's in a standard GTS25t (with blah blah...) is very unlikely, but maaaaaaaybe possible?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...