Jump to content
SAU Community

New E-manage Ultitmate

ed

By ed,
in Engines & Forced Induction

 Share

Recommended Posts

ed Grand Master

ed

Posted
Posted

The new emanage is out now.

Check it out here...http://www.mohdparts.com/emanage/tmp/ultim...spec/index.html

A few features that will appeal to most are:

A/T Shift Compensation Feature - On vehicles with Automatic Transmissions, ignition timing can be compensated at set shift-up and shift-down points

A/F Target Value Map (feedback tuning function) - By inputting target Air Fuel values in this map, “e-mange Ultimate” will automatically make corrections to the “Injection Map,” if an A/F meter (*high quality) is connected to the Auxiliary Output signal. This feature can shorten the tuning time.

Acceleration Ignition Map - Ignition timing can also be corrected for a rapid change in the throttle opening rate for a smoother transition into wide open throttle

Fouled Plug Feature - When initiated this feature can help clean fouled spark plugs by cutting the injector’s firing at start up. To fix the fouled plug start the engine with wide-open throttle.

Speed Limiter Cut Feature - This feature will eliminate the factory speed limiter. (May not work on some vehicles)

Knock Monitor (Future update) - Knock can be monitored and reviewed.

Link to comment
https://www.sau.com.au/forums/topic/78717-new-e-manage-ultitmate/
Share on other sites
ed Grand Master

ed

Posted
  • Author
Posted
hmmm I spose I should do a search but how does this new model compare to a powerfc?

You'll be comparing a piggy back to a standalone.

The MAJOR up side to this is that it claims to work on auto cars with the timing problem resolved.

So auto owners will want to look in to this.

666DAN Grand Master

666DAN

Posted
Posted

Prices are here http://www.mohdparts.com/emanage/

Would be $900 delivered to Aus for the e-manage plus the harness kit + software...also this guy is one of the best suppliers around, efficient and reliable and sends everything via UPS tracked.

rob82 Mentor

rob82

Posted
Posted

So let me get this right, it has direct control over the injectors? Also how the **** does it indivually tune the timing does it have direct sequential control over the ignition as well. And if it does do have control over both than why not just do away with the standard ECU? Maybe I'm interpretting it wrong.

ed Grand Master

ed

Posted
  • Author
Posted
So let me get this right, it has direct control over the injectors?  Also how the **** does it indivually tune the timing does it have direct sequential control over the ignition as well.  And if it does do have control over both than why not just do away with the standard ECU?  Maybe I'm interpretting it wrong.

Maybe it is like the HKS FCON PRO where it uses the stock ECU for cold starts, air-con etc... :crazy:

  • 2 weeks later...
  • 2 weeks later...
hoo@h Enthusiast

hoo@h

Posted
Posted
so is that $900 including all the bits and pieces or $900 and then harness and software on top of that? just confused

just orderd mine from perfectrun.com.au.

The unit itself is around AU$730 which include software and the complete harness set is about AU$112, and yet to find out how much the shipping cost is.

Now just need to find where I can get it install and tune in Brisbane area.

BTW, there's no english translation for it yet, because it's new item, but the guys at perfectrun told me if I can fax them the wiring instruction. They will be happy to translated it into english.

Sydneykid Grand Master

Sydneykid

Posted
Posted

$730 + $112 + freight + 10% duty + 10% gst = ~$1100

That's as much as a Power FC

On the Stagea I used a Jaycar DFA $80, Controller $70 and an SITC $210 = $360

And I don't have to work out my own mapping for gearshifts as the SITC doesn't change the standard ECU logic. Pop over to the Stagea section for progress to date and ongoing results:cheers:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      Sorry. Front brake calipers
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
×
×
  • Create New...