Jump to content
SAU Community

Recommended Posts

Guest Boxhead

ive been using the search feature, and well, i have found stuff on tyres, but most of it is what tyrs do you use for drags etc.

Basically i want to know what are good all round tyres, as in not the cheapest malaysian specials, but as most of us cant afford the ultimate in stree legal drag tyres etc.

for stock 16's for r32 and r33, what are the best performance for yoru dollar, as in around $600-$750 a set of 16's...

also what price did you get them for if you got a set...

thanks guys

Link to comment
https://www.sau.com.au/forums/topic/7908-tyre-selection/
Share on other sites

Guest Boxhead
Originally posted by skyline33

have you thought of getting good second hand tyres

yeh i will do that one day, but as my car is soon to be complied, i thought i may aswell just get decent tyres for compliance, rather then buy el cheapos for that, then buy some good second hand tyres.

Link to comment
https://www.sau.com.au/forums/topic/7908-tyre-selection/#findComment-115466
Share on other sites

are the Dunlop FM901's a bit too good for what u want?? I've heard heaps of goods things about those.

And some sort of Falken tyres i think...i've never really looked into it as i've only got a pulsar with like 2inch hubcaps, so tyres have never really been an issue :D

Link to comment
https://www.sau.com.au/forums/topic/7908-tyre-selection/#findComment-115470
Share on other sites

Guest Boxhead
Originally posted by SS8_Gohan

are the Dunlop FM901's a bit too good for what u want?? I've heard heaps of goods things about those.

And some sort of Falken tyres i think...i've never really looked into it as i've only got a pulsar with like 2inch hubcaps, so tyres have never really been an issue :D

i could be wrong, but when i was in a tyre shop with a mate, the guy was telling me these are not made anymore, and the new top of the range the ss01 or whatever they are , were made to replace, and i think with my budget i could have 2 :S

Link to comment
https://www.sau.com.au/forums/topic/7908-tyre-selection/#findComment-115471
Share on other sites

Guest Boxhead
Originally posted by DON91E

bridgestone POTENZA's??

the were the standard tire on the S15, i like em, i reckon they have been the best tire i have actually USED yet...

Also the SO1's or SO2's or wateva there called dunno who makes em ccan't remember...they were the standard tires on the S2000

Donnie

yeh but how much do these cost?

thats what im really looking for. cost and also how you rate them..

its one thing havin a salesman telling you how good they are :D

Link to comment
https://www.sau.com.au/forums/topic/7908-tyre-selection/#findComment-115479
Share on other sites

DON91E/Boxhead,

There are many types of Potenza's ranging from hard compound throught to the very soft and sticky R rated tyres. The R rated tyres will only last 5-10,000 km's, so for daily driving aren't very practical if money is an issue.

There are many good tyres available from the top manufacturers. I use Toyo TPG's, have used Falken's and Grid II's. The Toyo's are the best, by far, but also cost the most, the Falkens are good, the Grid II's have a very hard compound so last ages but have a lack of grip.

Each tyre shop you go to will have there favourite top of the line tyre, where thay make a large markup on, so don't be too pursauded by there opinion.

I like the Toyo's as they give grip with moderate road wear, but for racing/drags then I'll be using the Potenza R's.

See'ya:burnout:

Link to comment
https://www.sau.com.au/forums/topic/7908-tyre-selection/#findComment-115480
Share on other sites

Guest Boxhead
Originally posted by GTS-t VSPEC

DON91E/Boxhead,

There are many types of Potenza's ranging from hard compound throught to the very soft and sticky R rated tyres. The R rated tyres will only last 5-10,000 km's, so for daily driving aren't very practical if money is an issue.

There are many good tyres available from the top manufacturers. I use Toyo TPG's, have used Falken's and Grid II's. The Toyo's are the best, by far, but also cost the most, the Falkens are good, the Grid II's have a very hard compound so last ages but have a lack of grip.

Each tyre shop you go to will have there favourite top of the line tyre, where thay make a large markup on, so don't be too pursauded by there opinion.  

I like the Toyo's as they give grip with moderate road wear, but for racing/drags then I'll be using the Potenza R's.

See'ya:burnout:

once again i see no mention of actual prices.

but thanks for the tips..

im liking the toyo's, but have to go aruond window shopping and asking for prices i guess, but with my car still in japan. it makes it hard.

Link to comment
https://www.sau.com.au/forums/topic/7908-tyre-selection/#findComment-115485
Share on other sites

Boxhead,

It is difficult to put prices on tyres as I run 235/45/17's and 255/35/17's. My friend also owns a tyre store so I get it discounted from the retail price. It is definately worth going to a few places as the price difference can be quite alot.

See'ya:burnout:

Link to comment
https://www.sau.com.au/forums/topic/7908-tyre-selection/#findComment-115486
Share on other sites

Guest Boxhead
Originally posted by slip

901's would be good for you boxhead.

G Grids are ok.

Dont get 2nd hand.  If you can lose it under power in a non turbo auto, you should really invest in good tyres.  speak to LOTS of tyre shops.

215/50 R16's = good size if it has stock wheels.

yeh, im liking 901's but i will have to investegate into the price side of things a bit more..

to me tyre shops is about selling, not advice, hence i asked on here :D

i put that crash down to my stupidity on a wet and greasy road, not tyre choice or power or lack of power in the car.

Link to comment
https://www.sau.com.au/forums/topic/7908-tyre-selection/#findComment-115604
Share on other sites

Originally posted by Sumo

I got a set of Nankang 245/R17's on my R33, cost me $200 each.... They are ok when your on a budget after you've just bought a car :P

Cheers

Sumo

Hey Sumo, be wary of the Nankangs. They are okay when new but once tread gets to about half way they go off really badly. I had some on a Celica and they were terrible, no grip at all once the new tread started wearing. Being FWD the understeer was shocking - dry or wet it didn't matter.

I have Simex on the R33 but too early to tell how they are although again whilst new they are great. Go with others suggestions on the forum if it isn't too late to change your mind. The Simex I got are 235/45/17 and were $200ea.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/7908-tyre-selection/#findComment-115758
Share on other sites

I agree with Red Sky II, the Nangkangs I had on the back of my Skyline turned to shit after 50% tread, they are cheap for a reason. It is worth the money to get something good, you'll have heaps more traction and much better in the wet.

See'ya:burnout:

Link to comment
https://www.sau.com.au/forums/topic/7908-tyre-selection/#findComment-115833
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Welp, good to know. Will have to wait awhile until steady hands with drills and taps are available. In other news, these just arrived! I will weigh them for posterity.
    • 100% the factory sender is tapered, that is how it seals (well, that and teflon paste or tape)
    • Thanks folks - I've saved a few links and I'll have to think of potential cable/adapters/buying fittings. First step will be seeing if I can turn the curren abortion of a port into something usable, then get all BSPT'y on it. I did attempt to look at the OEM sender male end to see if it IS tapered because as mentioned you should be able to tell by looking at it... well, I don't know if I can. If I had to guess it looks like *maybe* 0.25 of a mm skinnier at the bottom of the thread compared to where the thread starts. So if it is tapered it's pretty slight - Or all the examples of BSPT vs BSPP are exaggerated for effect in their taper size.
    • Have a look at that (shitty) pic I posted. You can see AN -4 braided line coming to a -4 to 1/8 BSPT adapter, into a 1/8 BSPT T piece. The Haltech pressure sender is screwed into the long arm of the sender and factory sender (pre your pic) into the T side. You can also see the cable tie holding the whole contraption in place. Is it better than mounting the sender direct to your engine fitting......yes because it removes that vibration as the engine revs out 50 times every lap and that factory sender is pretty big. Is it necessary for you......well I've got no idea, I just don't like something important failing twice so over-engineer it to the moon!
    • Yup. You can get creative and make a sort of "bracket" with cable ties. Put 2 around the sender with a third passing underneath them strapped down against the sender. Then that third one is able to be passed through some hole at right angles to the orientation of the sender. Or some variation on the theme. Yes.... ummm, with caveats? I mean, the sender is BSP and you would likely have AN stuff on the hose, so yes, there would be the adapter you mention. But the block end will either be 1/8 NPT if that thread is still OK in there, or you can drill and tap it out to 1/4 BSP or NPT and use appropriate adapter there. As it stands, your mention of 1/8 BSPT male seems... wrong for the 1/8 NPT female it has to go into. The hose will be better, because even with the bush, the mass of the sender will be "hanging" off a hard threaded connection and will add some stress/strain to that. It might fail in the future. The hose eliminates almost all such risk - but adds in several more threaded connections to leak from! It really should be tapered, but it looks very long in that photo with no taper visible. If you have it in hand you should be able to see if it tapered or not. There technically is no possibility of a mechanical seal with a parallel male in a parallel female, so it is hard to believe that it is parallel male, but weirder things have happened. Maybe it's meant to seat on some surface when screwed in on the original installation? Anyway, at that thread size, parallel in parallel, with tape and goop, will seal just fine.
×
×
  • Create New...