Jump to content
SAU Community

HELP: Clutch R33

mufro

By mufro,
in Western Australia

 Share

Recommended Posts

boostED82 Collaborator

boostED82

Posted
Posted

Go see Ross at Autoclutch in Osborne Park. Extreme 9 puck ceramic clutch kit with 2200lbs or 2500lbs pressure plate. Supplied and fitted for $850ish. They also try to promote a lightened flywheel which they can also supply and install for $400ish. I've been there before and they are good guys, no BS...

Link to comment
https://www.sau.com.au/forums/topic/79220-help-clutch-r33/#findComment-1445972
Share on other sites
damono Proficient

damono

Posted
Posted
lol damn...u rekon thats the cheapest could get it 4? haha

Well jerk ass, you asked for my advice. Get a cheaper one if you want, but it's probably crap. Goto automasters or supercheap auto if you want and see how good it is. No need to act like a smart ass, these people are only trying to give you help when you ask a question

Mitchy_, yeh the same one.. very happy with it. Haven't really given it a real killin yet tho

boostED82, i got the same clutch same price from hyperdrive. It was $850 for clutch installed and fitted, but extra $80ish for machining of flywheel i think, while it was out they thought it'd be best

Link to comment
https://www.sau.com.au/forums/topic/79220-help-clutch-r33/#findComment-1450956
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      boost source Size Garrett gt28 gen2

      By GTSBoy · Posted

      Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • timmy94
      boost source Size Garrett gt28 gen2

      By timmy94 · Posted

      I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
    • timmy94
      boost source Size Garrett gt28 gen2

      By timmy94 · Posted

      I do have loctite 243 and 246 and a few more models. I could drill it now in place and make new threads for m12 and order an4 - m12 coupling and fit that to the turbo. Run a braided hose to the EBC which I could get a an4 to 1/8npt 
    • timmy94
      boost source Size Garrett gt28 gen2

      By timmy94 · Posted

      So M12 and sealant should be fine?    NPT ” because that’s what I had and what I could get atm. 
    • r32-25t
      R32 gtr transmission strength, billet plate

      By r32-25t · Posted

      Wouldn’t touch par if they gave it to me. You need to ask how much power you’re looking to make and then add about 50% to it because that’s what you’ll end up making  The factory box says no more at about 350kw or so, the upgraded synchro boxes won’t handle much over 500kw for long and at that point you’re looking at an auto or dog engagement manual,  once you’ve gone dog engagement you may as well go sequential, they cost a little bit more but it’s worth it  also while you’re at it you should upgrade the transfer case with 10 friction plates 
×
×
  • Create New...