Jump to content
SAU Community

R33 Sedan - modified

4door_Sleeper
 Share

Recommended Posts

4door_Sleeper Veteran

4door_Sleeper

Posted
Posted

Colour/Year/Make/Model

- Silver 1993 ECR33 Nissan Skyline GTS25t Sedan

Engine Accessories

- Trust 3" Straight Through Cat Back Exhaust and Muffler

- FLYN 3" Straight Through Dump and Front Pipe

- K&N High Flow Pod Filter with Cold Air Partition

- Hybrid 600 x 300 x 70 Front Mount Intercooler and Piping

- Blitz DD BOV

- Nismo Adjustable Fuel Pressure Regulator

- NGK BCPR6ES (0.85mm gap)

- Nissan GTR Timing Belt

- Nissan N1 Water Pump

- Nissan Genuine Idler and Tensioner Pulleys

Engine Management

- Apexi SAFCII

- Apexi SITC

- Autospeed Norgren Boost Controller

Driveline

- 4 Speed Automatic

- LSD

- HICAS

Suspension

- Stock Shocks and Springs

- Custom Front Strut Brace

- Whiteline Adjustable Front Castor Bushes

- Whiteline Rear Subframe bushes

Brakes

- Recently machined front Rotors

- RB74 Front Pads

- DBA Kangaroo Paw Rear Rotors

- EBC Black Rear Pads

- Castrol GP 600 Racing Brake Fluid

- ABS

Bodywork

- SAU Stickers

- Rear Carbon GT Wing

- Factory Front Aero Bar Modifications

- Phillips Crystal Vision Headlights

- Metallic 25% Window Tint

Rolling Stock

- BBS 16" Rims

- Bridgestone SO3 tyres

Interior Gadgetry

- Apexi RSM /w G Sensor

- Splitfire Boost Gauge

- HKS Turbo Timer

- Reverse EL Dash

- Momo Steering Wheel with Nismo Horn Button

- Jays Leather Handbrake Boot

- Aftermarket Alarm, Keyless Entry, Genuine Nismo Key

Stereo Componentry

- Addzest CD/MD Head Deck

Price

- $14000 negotiable for quick sale...(recently purchased for $15,500)

-

Story

- Recently purchased this car from Adrien Strutton in QLD for my wife, but due to an unfortunate change in financial circumstances I have to sell it.

- Well maintained mechanically, it drives faultlessly.

- Well worth the price as it has most of the modifications you would want to do to a standard car already done to it. (and save yourself thousands)

No expense spared...

- Complied 10/2002...

- Never crashed...

- Never let us down...

-

Contact

- Guy

- 0413 648 750

- Email [email protected]

- or PM me

Link to comment
https://www.sau.com.au/forums/topic/79440-r33-sedan-modified/
Share on other sites
4door_Sleeper Veteran

4door_Sleeper

Posted
  • Author
Posted

Price is $14,000 ono

I purchased the car a few months ago for a little more than this. At that time I thought I had a bargain. I am not gready so I will pass the car on at a good price.

I have had a PM asking if there is anything wrong with the car (implication being that with these mods the price is too low) but I assure you the car is in good condition with no faults that I am aware of.

I believe this is an ideal opportunity to get into a great car at a good price. You can purchase a new (to Australia) import with fewer km, but it will cost you more, and by the time you factor in all the mods that have already been done to this car you are well ahead.

4door_Sleeper Veteran

4door_Sleeper

Posted
  • Author
Posted

Price is $14,000 ono

I purchased the car a few months ago for a little more than this. At that time I thought I had a bargain. I am not gready so I will pass the car on at a good price.

I have had a PM asking if there is anything wrong with the car (implication being that with these mods the price is too low) but I assure you the car is in good condition with no faults that I am aware of.

I believe this is an ideal opportunity to get into a great car at a good price. You can purchase a new (to Australia) import with fewer km, but it will cost you more, and by the time you factor in all the mods that have already been done to this car you are well ahead.

strutto Grand Master

strutto

Posted
Posted

Jeez I only just saw this otherwise I would have responded earlier... Tis a shame you can't keep it Guy :) Tis also a shame I can't buy it back :rant:

I'll confirm that this car IS a bargain at $14000... If anyone would like to know more about the car feel free to contact me and I'll help where I can...

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • R34_GT to Turbo
      Does RB25DE Neo lower intake work with RB25DET Neo Upper intake manifold?

      By R34_GT to Turbo · Posted

      Ok I get you. But isn’t the butterfly intake a headache with the +T?  see this is my plan so far but please advise me into the right direction.  Nistune Ecu, 1000cc Bosch injectors, TD05 or TD06 Kinugawa turbo using stock rb25det exhuast manifold, walbro fuel pump unsure of model I think it’s 450/460, spitfire coils and sparks to suit and a R35 MAF sensor and boost sensor.    I was thinking maybe do a cheap eBay plenum $400-500 or try find a stock det neo intake. I think I’d port match it so it’s getting the full capacity but open to advice please.  Thanks 
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      The issue now is the 'fuel cut' while driving, and when it happend, it does not stall. This, I did not test the fuel pressure while driving as I cannot with a fuel pressure gauge. I do have Nistune logs, yes. I have also replaced the MAF Sensor.   Also related to the FPG Fuel Hanger – I just realized that I need a Deutsch Crimp Tool to crimp some cables for the FPG Fuel Hanger. Need to purchase additional cables as the kit only included 2, which are for the float. FPG has not responded to my emails so far since purchasing. I thought about taking it to someone and having it done professionally, but I am reluctant since everyone I took it to messed up in some way.  
    • MBS206
      NC MX5

      By MBS206 · Posted

      There's a good German place in Brisbane if youre up for the drive 😛
    • Dose Pipe Sutututu
      NC MX5

      By Dose Pipe Sutututu · Posted

      The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • joshuaho96
      R33 GTR running -9 with no tune

      By joshuaho96 · Posted

      Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
×
×
  • Create New...