Jump to content
SAU Community

Recommended Posts

Hi all, I am a new ceffy owner :P Got a few questions for you guys

1) Why does my ceffy have two throttles in the engine bay? My mate said it may have had cruise control but i couldn't find anything on the dash.

2) Is the ceffy actually wider than the sil? What offset is required for wheels to be flush with the guards?

3) Where can I get a kit?

and... 4) SR or RB20 for the conversion :( (I lost my lisence for 6 months so I got about 5k and 5 more months to make it into something decent ;))

Thanks for your help,

Chris

Link to comment
https://www.sau.com.au/forums/topic/79637-ceffy-question/
Share on other sites

Im not looking for huge power as I have already lost my lisence once and the temptation would be even greater with a 25, just looking around 150-170rwkw which is quite possible with a near stock rb20, maybe with a tb25 turbo or something. That 5k wasn't justr for the engine btw :(

LoL, you will piss that in no worries.

Just go an rb20 then. Say aftermarket management. Go the rb25 turbo so it makes that power easier. FMIC, gearbox if yours is still auto etc.

Theres ya 5k...

Then spend whatever else you had on decent suspension. Springs that work (ie not too hard) all your sway bars, castor, camber, bushes, then get stuck in to the brakes etc. Have the whole package.

Link to comment
https://www.sau.com.au/forums/topic/79637-ceffy-question/#findComment-1450832
Share on other sites

Yeah if you want response go the sr20 with the s15 BB turbo. too_much was pulling 190rwkw with his sil80 I believe.

You'll need a FMIC, fuel pump, injectors, tune ... plus engine plus gearbox.. hmm I think done right you could pull it under $5k.

I'd go the SR ... I would never ever put a rb20 into a cefiro.. if it alreayd had one in there then no worries.. but why would you put one in ? :D

Link to comment
https://www.sau.com.au/forums/topic/79637-ceffy-question/#findComment-1451375
Share on other sites

Yeah if you want response go the sr20 with the s15 BB turbo. too_much was pulling 190rwkw with his sil80 I believe.

That's 197.7rwkw thankyou very much!.. on 12psi with factory ecu, injectors and afm!

will be interesting to see what it does on 16-17psi

Link to comment
https://www.sau.com.au/forums/topic/79637-ceffy-question/#findComment-1451558
Share on other sites

3) Where can I get a kit?

and... 4) SR or RB20 for the conversion :) (I lost my lisence for 6 months so I got about 5k and 5 more months to make it into something decent :D)

Thanks for your help,

Chris

3) For a kit there are a few guys on NS.com (sponser section) selling kits.

4) i'd go a RB25, or SR20, just depends on what you want. SR for dorifto.

Link to comment
https://www.sau.com.au/forums/topic/79637-ceffy-question/#findComment-1452336
Share on other sites

I was under the impression rb was:

+more powerful stock

+designed for the car

++cheaper

-older

-less torquey

sr's:

+newer

+torque

+lighter

+more aftermarket parts

-more expensive

-less base power

Won't be using the car for pure drift, maybe an event evey now and again. So many people seem to be against the rb :)

Link to comment
https://www.sau.com.au/forums/topic/79637-ceffy-question/#findComment-1452373
Share on other sites

hey when you go from rb to sr did you have to change any of the mounts? did you buy them or fabricate? how is it done? also how much of a pain would it be to get your warning lights and speedo etc working? perhaps too much could enlighten us?? :)

Link to comment
https://www.sau.com.au/forums/topic/79637-ceffy-question/#findComment-1452375
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
    • I have more than enough digging, laying blocks, moving gravel, airrating, feeding and top soiling the grass, and setting up the veggie gardens growing some seedlings,  and then removing all the unused rock to keep me busy for the next few months at least,  hopefully the rain stops soon so I can get a few hours in this arvo, but, before that Sunday is washing day, is every body happy, you bet your life we are Nice country road day drives are a day off whenever I'm muscle sore from all the landscaping at the moment, but, more epic multiple day drives will start once the majority of the big jobs outside are completed
×
×
  • Create New...