Jump to content
SAU Community

Busselton


Recommended Posts

As some of you know I went down to Busselton for a bit of break for Xmas. Had a great time as if you think your car gets attention in Perth goe down South, everyone has a look:) There were 2 other lines down there (a black series 1 R33 and a gunmetal R32 with a frontmount,bov and a R33 GTR wing which looked stupid) so I had a few people waving at me and had a little run with the R32.

A friend of a friend down there has just bought that GSR "WRXETA" and I went for a spin in that, no power till 4,000 but after that...wow, he didnt launch it with me in it but I dont doubt its best time of 11.6 on streetlegal race rubber.

Also got some fuel consumption figures for the GTR and they impressed me, about 9.5 - 10L per 100K's. It helps if you reset your ecu before going for a long drive though, makes the ecu forget all your spirited driving :P

Also it is Trev city down there, saw 4 diff. Maloo utes, a TS50, couple of clubsports and a senator or two.

Anyways that it, what did everyone else get up to?

Ryan.

Link to comment
https://www.sau.com.au/forums/topic/7964-busselton/
Share on other sites

  • Replies 60
  • Created
  • Last Reply

Top Posters In This Topic

almost dying on Perth Heat!

almost T-boned my best mate's Brand New V8 Commie. :lol:

Broke up with gf :P

Got nice pressies from everyone

Got rejected from girls at the paramount quite a few times...:P

Got Drunk and done few stupid stuff with bottles

Cleaned my room!

I drilled a hole on my car for CAI. -just need few PVC piping.

Had fun with sunday morning rain!

Perth Gory won the PPowers 2-1

I am stuck at work boring.....

cheers

Joe

Link to comment
https://www.sau.com.au/forums/topic/7964-busselton/#findComment-116081
Share on other sites

Originally posted by Pva_Glue

almost T-boned my best mate's Brand New V8 Commie. :lol:

all it deserves

Broke up with gf :P

This a new one or the one who was using u to make her ex jealous

Got nice pressies from everyone

Not me

Got rejected from girls at the paramount quite a few times...:P

Lol losing ur touch buddy

I drilled a hole on my car for CAI. -just need few PVC piping.

U go girl

I am stuck at work boring.....

atleast u don't have a nightshift on newyears eve

cheers

Joe

Link to comment
https://www.sau.com.au/forums/topic/7964-busselton/#findComment-116106
Share on other sites

Originally posted by skyzerr33

atleast u don't have a nightshift on newyears eve  

cheers

Joe [/b]

LOL night shift! man that's sucks...

anyway at least you can just pop in to sprit sound bar when you finish! :lol:

cheers

Joe

ps.it's new one I had great time of 40 days of happiness...:P

cheers

Joe

Link to comment
https://www.sau.com.au/forums/topic/7964-busselton/#findComment-116111
Share on other sites

Ahhh, Busselton in summer :P

Hot chicks in white bikini's on the beach is all I think of when someone says "busseeellttooon" *sigh*

Which kinda reminds me of a really good idea: A busselton run down south for the day would be a good outing for SAU methinks.

I heard about the success of the last overnight busselton/stay thing, sounded really fun :P

I dunno, how about it guys ? who's up for an event like this ? while the weather is nice ;)

-Kym.

Link to comment
https://www.sau.com.au/forums/topic/7964-busselton/#findComment-116114
Share on other sites

Carl has had some dramas with the GSR since buying it off Toby and was quite pissed Toby took off the mags, seats, stereo, cold air intake and was suprised to find that the oil catch can is held in place by double sided tape.

I'm not saying he isnt happy with the car, far bloody from it, just he thought he was getting more :P

But I'm sure they both got a deal that was more than satisfactory in the end.

He needs to ask Toby about the launch control and water IC spray as he thinks its hooked up to the windscreen squirters 'cause they dont work !

Link to comment
https://www.sau.com.au/forums/topic/7964-busselton/#findComment-116544
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
×
×
  • Create New...