Jump to content
SAU Community

Recommended Posts

Hi all,

Just after some opinions.

Looking at getting an Aftermarket ECU for my 32 (Rb20det)

Is there anything anyone wouldnt go near.. or would go straight for..

Im just after a plug-in.. as im just trying to get the car up and running..

Nothing tooo Expensive.. but decent....

Cheers all.

Link to comment
https://www.sau.com.au/forums/topic/80115-r32-aftermarket-ecu/
Share on other sites

Why do u need a new ecu ??? are you planning on doing a lot more mods eg turbo injectors fuel pump etc if not don’t waste your money on the PowerPC as u need the ap engineering one which is a fair bit more expensive than the standard one I think they go for around $1150 + second hand with hand controller the new ones are even more aren’t they ???

Just get a standard ecu $100 - $200 then an SAFC and you will be right :)

Really depends on the extent of modification you plan on taking out. The r32 computer is fairly common to be remaped as it is easy to do (apparently) in comparison to the r33 computer.

If you go full plug n play, PFC or Wolf3d are prolly best options.

I once heard as a rule of thumb 20% of your build budget should go into computer and tuning.

Power FC will increase power as it lets you play with air/fuel ratios and ignition timing. Ive seen people net 40+kw from fitting an aftermarket ecu and getting a good tune. SAFC would cut it for air/fuel ratio, but still doesnt let you play with ignition timing etc.

Thanx guys...

IM not realy planing anything as yet for massive mods..

The standard ecu has a fuel cut.. which is causing big problems for me atm..

Im after somthing that will increse power, good for tunning.

Mods: Boost increase and front mount.

thats it..

Seems like PFC is the way to go.. Ill have a looka round for prices.. but then again.. might be to expensive for what im looking for.

Thanx all.

SAFC does nothing more than intercept values from the AFM, alter them, and lie to the stock ECU to get it to add/remove fuel in places it shouldnt be. If you just want to get rid of the fuel cut, HKS fuel cut defender... but why is it hitting fuel cut?

I still say save the extra $$ and get PFC, its fully tunable (fuel mapping, ignition mapping, temp correction mapping, afm configuration etc) and you'll net more power from it as well as improve driveability throughout the whole rev range.

Fuel cut.... well ive wound the boost up... and since then its been cutting majorly...

But i also think ther is something else wrong...

The car just keeps cutting when boost kicks in.

Plus i kinda like the look of a lil hand controller sitting it the cabin.

Sounds like you've wound the boost up too high and with the cold weather you are hitting fuel cut due to overboosting?

I often see upto 2lb of extra boost in really cold weather. EBC doesn't seem to be able to prevent it going that high when its caused by low air temperatures.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • roof rail delete used to be a thing, they were made locally for a while too
    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
×
×
  • Create New...