Jump to content
SAU Community

Recommended Posts

What method did you use to fit the AFM in the pipe?

I'm guessing you used the same ID pipe as the original ID of the AFM?

Yes, I made a simple flat plate flange out of stainless steel and welded a bit of 76mm pipe to the inlet side and then used silicon pipe to connect it up to the rest of the 76mm custom intercooler pipework. I've used a GReddy E-manage to handle all the fuelling changes.

u can just buy an adapter plate to fit on to the afm. gtskoop im running an rb25det.if you want ill post pics of my engine bay on here.

Thanks mate, im goin away soon and wont b checkin my emails 4 a while so when i get back, i'd definatly appreciate some pics of ur bay... so yeah, i'll PM ya :)

  • 2 weeks later...

I have done this a couple of times on RB20's and 25's and all I will say is that it makes a HUGE difference to the tune... As far as reliability for the AFM I haven't seen any specific problems, but it only makes sense that the pressurised warmer air with slight oil from the turbo would decrease the life of the AFM... but seeing as most of them are ok after 10 years, if it halfs the life to 5 years??

I run a Z32 AFM after the cooler on my CA, mainly cause there's a 4" bellmouth on the turbo and space is restrictive so it had to be after the cooler.. seems to work really well with no immediate reliabilty probs...

sam

  • 2 months later...
I have done this a couple of times on RB20's and 25's and all I will say is that it makes a HUGE difference to the tune... As far as reliability for the AFM I haven't seen any specific problems, but it only makes sense that the pressurised warmer air with slight oil from the turbo would decrease the life of the AFM... but seeing as most of them are ok after 10 years, if it halfs the life to 5 years??

I run a Z32 AFM after the cooler on my CA, mainly cause there's a 4" bellmouth on the turbo and space is restrictive so it had to be after the cooler.. seems to work really well with no immediate reliabilty probs...

sam

Dr_Drift,

Can you elaborate why it has made a difference to the tune? Differnece in tuning with just SAFC or a Full E-Manage type system? More accurate A/F ratios? More increaed in power? Ease of tune?...

Done it to a few big hp cars with large turbo's to stop the air reversion problem which plays hell with the AFM causing hunting as it comes back to idle.

We did one in particular on a car that already had been tuned by us using one of the famous ( infamous ?? ) Lumpyroms.

All I can tell you is when we changed it to post intercooler, it ran totally different and required virtually complete retuning.

And yes it was an RB25DET and yes we did chip the Nissan computer that plugs in to the factory wiring plug and no it wasn't an RB25 computer :( :(

Cheers

Ken

i run blowthru maf on my car as ive got limited space for maf mounting near the turbo inlet (turbo inlet is 4").

so far its been good to me, but as stated before it can require retuning as mine required me to fiddle with the ecu's k consant to get it to run right (rechipped ecu).

as far as pipe work ive got 2.5" charge piping and use adaptors from 2.5 --> 3 to go to and from the maf and havent had any problems thus far.

however i have blown the little plastic square cover off of the maf which then in turn caused a massive boost leak, but after a thourough cleaning and a stern resilliconing it hasnt leaked again and actualy spools faster :).

this is actualy on a rb20det swapped into a s14 chassis currently making 288rwkw's before tuning......

Edited by carl h

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
×
×
  • Create New...