Jump to content
SAU Community

Recommended Posts

I think no.2 is the same as something I got in my car. It was called a "Hyper Back Socket" which is Engrish for a cigarette lighter box. If you want I'll post pics of the one that came in mine, but I'm pretty sure that's what it is as it looks so similar.

Actually I'm not joking. Mine's just a big box with a cigarette lighter in it. Absolutely useless. I have nfi why it was in there.

I'll get the photos soon. It is in a box somewhere as it was removed as soon as the car landed in Oz.

yer.. number 2 is a cigarette lighter double adapter... had one in my car which had a few devices plugged into it.

you plug the extra ones in underneath and you can turn them on with those buttons on the top.

same cage as mine too.. swoite.

Shaun

As with most mods, it depends who you see for a RWC and which person you get at VicRoads when you rego the car, I went thru chasing up if I could put one of those Japanese style roll cages in my GTR. There main concern with that type of cage is that it doesn't follow the A-piller all the way to the dash (and then thru the dash) so depending on which angle you look at the a-piller it can be said that it obstructs your view ?? The Vic roll cage rules are open to interpretation so just hope you don't get a ball breaker.

In the end I found out that there not CAMS legal so I didn't bother...

Thanks for your input MIKGTR

well i just want it in there i dont mind if its not cams legal just if i can leave it in there i will dosnt bother me heheh =)

so hope it all goes well

ill take to to the vic roads my friends to their cars at they had heapz of mods and they didnt even ask about them hahah

see how i go if any one can give me advise id appreciate it =)

Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...