Jump to content
SAU Community

Recommended Posts

Originally posted by MrMayhem

i got a standard one on a neo if its the same you can borrow it as long as i dont need to hunt it up

i wouldn't have any idea whether they are the same or not, does anyone else reading the thread know if they are the same??

but if they are that would be much appreciated MrMayhem, and yeah it would only be a couple of days at the most and ya wouldn't need to hunt it up.

:-)

Cam

I would be really interested in what regulation actually dictates how loud a BOV can be. The only regs on noise coming out of a vehicle that I know of reffers to the exhaust. Have a mate who is a copper and he hasn't heard of it either. Truck air brakes can be notriously loud...

R33 Cam, is it possible to ask the guys when you go back next what the correct ruling on this, what are the maximum dbs allowed, and how/where they must be measured from (rpm, distance, angle etc). Or perhaps the EPA would be a better one to contact, because if it is noise related it would be their ruling?

Stevve

MrMahem:

Thanks for trying anyway man, much appreciated.

Nexus_SiX:

standard exhaust, hehe, i keep meaning to get in touch with ya but always forget, but maybe thats a good excuse/point now. are you north or south of the river??

Steve:

the guys at the pits said they aren't illegal as long as they aren't to loud, and apparently mine is too loud, well thats what he said anyway, i think it would just be easier to put standard one back on for going back over, as i dont wanna get on the wrong side of them, cause then they would prob pick alot more than they have.

Pva:

im not sure about the regulations on sound level etc etc, but his words at the pits were, i quote " your BOV sounds like a Mack truck parking" hehehe.

2rismo:

thanks and ill keep it in mind, if nothing comes up over here :D

MrSnrub:

Same Ben much appreciated for the offer, ill be in touch if nothing comes up, are u north or south of the river???

Originally posted by R33_Cam

....as long as they aren't too loud..... i quote " your BOV sounds like a Mack truck parking" hehehe.

This sort of thing really pisses me off. How bloody vague is that - probably no acutal rule on volume, IMO, this guy has his hand seriously attached to his d!ck. If it sounds like a mack truck is he saying mack trucks should all be defected? When was the last time he had his ears calibrated. I would be taking a copy of the notice, and going to see his supervisor (then taking my car somewhere esle to get the sticker off:) ) Where are you getting the inspection done currently, sounds like somewhere to steer clear of.

Happy now, I've had my vent:D

PVA Glue: the 96db, is that for the exhaust, or anywhere from the vehicle - I am pretty sure the exhaust has to be measure at a specific rpm, angle and distance from the muffler - does this mean that R33 Cam's BOV is loud enough to cause permanent ear damage to pedestrians? hehehe

Originally posted by Steve

This sort of thing really pisses me off.  How bloody vague is that - probably no acutal rule on volume, IMO, this guy has his hand seriously attached to his d!ck.  If it sounds like a mack truck is he saying mack trucks should all be defected?  When was the last time he had his ears calibrated.  I would be taking a copy of the notice, and going to see his supervisor (then taking my car somewhere esle to get the sticker off:) )  Where are you getting the inspection done currently, sounds like somewhere to steer clear of.

Happy now, I've had my vent:D  

PVA Glue: the 96db, is that for the exhaust, or anywhere from the vehicle - I am pretty sure the exhaust has to be measure at a specific rpm, angle and distance from the muffler - does this mean that R33 Cam's BOV is loud enough to cause permanent ear damage to pedestrians? hehehe

i just think there is one rule for some things/ppl and another rule for other ppl, etc etc. but agree totally with ya steve, so they sayin all air brakes and exhaust brakes on trucks should be banned, i dont think so!! and i think they are well in excess of 96db

im pretty sure it is 90db with exhausts, was last time i checked (bout a year ago) that is a stationary test, done at approx 1metre from exhaust outlet, at a certain RPM, depending on engine capacity.

is it adjustable?

cant u just tighten it right up so it doesnt open much, or muffle the noise with something.

then it passes with that BOV, get a permit for it, and adjust it back to where it was.

Then no more yellows.

BTW how do they test, do they drive it hard enough to build boost, or do they do it in neutral? I know i certainly wouldnt want some bodgy inspector driving my car enough to open the BOV.

Originally posted by deesh

I know i certainly wouldnt want some bodgy inspector driving my car enough to open the BOV.

I'd just say sorry mate, your not driving my car. It's not insured for you to drive it. *in your face!*

We all know their eyes light up when they see a performance car come through the pits :|

Not to sure on the exact details but the standards for road noise go like this.....

They take a bit of road and measure the car accelerate to 80 and stay there for a certain length of road. It has to be under a certain number of dB at all times.

Thems the Aussie standards all cars have to adhere to.

ah i have a standard BOV but im outta the country at the moment...

if im not mistaken the law concerning exhausts is 98db at a 1 metre distance when ure car is revved up to 1500rpms?

Cam - just out of curiosity, what BOV are u using that is deemed too loud?

bambam

Originally posted by Strich9ine

I'd just say sorry mate, your not driving my car. It's not insured for you to drive it. *in your face!*

We all know their eyes light up when they see a performance car come through the pits :|

And the reply would be,

'Sorry mate, you're not driving that car home, hand in your plates, and call a tow truck.'

The test drive is to check the car is safe to drive on the road, eg, no flat spots - I got done for a flat spot once.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
×
×
  • Create New...